R2#show version | include Cisco IOS XE Software|uptime is
Cisco IOS XE Software, Version 17.03.08a
R2 uptime is 17 minutes
R2#show interfaces description
Interface                      Status         Protocol Description
Gi1                            up             up       management
Gi2                            up             up       lab segment
Gi3                            admin down     down     
Gi4                            admin down     down     
Lo1                            up             up       static-routes f$^\h(<g^T(c^A.e.^[e^Eo<R2e^A4o<	
Lo9                            up             up       metric f/^Th<^Cg^T(o<R2e^A4o<	
R2#show ip interface brief
Interface              IP-Address      OK? Method Status                Protocol
GigabitEthernet1       10.19.12.14     YES TFTP   up                    up      
GigabitEthernet2       192.168.100.2   YES manual up                    up      
GigabitEthernet3       unassigned      YES unset  administratively down down    
GigabitEthernet4       unassigned      YES unset  administratively down down    
Loopback1              10.130.2.1      YES TFTP   up                    up      
Loopback9              10.130.9.2      YES TFTP   up                    up      
R2#show ipv6 interface brief
GigabitEthernet1       [up/up]
    unassigned
GigabitEthernet2       [up/up]
    FE80::5054:FF:FEF7:891B
    2001:DB8:100::2
GigabitEthernet3       [administratively down/down]
    unassigned
GigabitEthernet4       [administratively down/down]
    unassigned
Loopback1              [up/up]
    FE80::21E:14FF:FEC8:7300
    2001:DB8:130:2::1
Loopback9              [up/up]
    unassigned
R2#show ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area 
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2, m - OMP
       n - NAT, Ni - NAT inside, No - NAT outside, Nd - NAT DIA
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static route
       H - NHRP, G - NHRP registered, g - NHRP registration summary
       o - ODR, P - periodic downloaded static route, l - LISP
       a - application route
       + - replicated route, % - next hop override, p - overrides from PfR
       & - replicated local route overrides by connected

Gateway of last resort is 10.19.0.1 to network 0.0.0.0

S*    0.0.0.0/0 [1/0] via 10.19.0.1
      10.0.0.0/8 is variably subnetted, 6 subnets, 3 masks
C        10.19.0.0/16 is directly connected, GigabitEthernet1
L        10.19.12.14/32 is directly connected, GigabitEthernet1
C        10.130.2.0/24 is directly connected, Loopback1
L        10.130.2.1/32 is directly connected, Loopback1
S        10.130.9.0/24 is directly connected, Null0
C        10.130.9.2/32 is directly connected, Loopback9
      192.168.100.0/24 is variably subnetted, 3 subnets, 2 masks
C        192.168.100.0/24 is directly connected, GigabitEthernet2
L        192.168.100.2/32 is directly connected, GigabitEthernet2
L        192.168.100.100/32 is directly connected, GigabitEthernet2
R2#show ipv6 route
IPv6 Routing Table - default - 5 entries
Codes: C - Connected, L - Local, S - Static, U - Per-user Static route
       B - BGP, R - RIP, H - NHRP, I1 - ISIS L1
       I2 - ISIS L2, IA - ISIS interarea, IS - ISIS summary, D - EIGRP
       EX - EIGRP external, ND - ND Default, NDp - ND Prefix, DCE - Destination
       NDr - Redirect, RL - RPL, O - OSPF Intra, OI - OSPF Inter
       OE1 - OSPF ext 1, OE2 - OSPF ext 2, ON1 - OSPF NSSA ext 1
       ON2 - OSPF NSSA ext 2, la - LISP alt, lr - LISP site-registrations
       ld - LISP dyn-eid, lA - LISP away, le - LISP extranet-policy
       lp - LISP publications, a - Application, m - OMP
C   2001:DB8:100::/64 [0/0]
     via GigabitEthernet2, directly connected
L   2001:DB8:100::2/128 [0/0]
     via GigabitEthernet2, receive
C   2001:DB8:130:2::/64 [0/0]
     via Loopback1, directly connected
L   2001:DB8:130:2::1/128 [0/0]
     via Loopback1, receive
L   FF00::/8 [0/0]
     via Null0, receive