RP/0/RP0/CPU0:R1#show logging start Sep 9 23:11:31
Wed Sep  9 23:19:44.611 UTC
Time Zone UTC, DST disabled
Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns)
    Console logging: Disabled
    Monitor logging: level debugging, 0 messages logged
    Trap logging: level informational, 0 messages logged
    Buffer logging: level debugging, 110 messages logged

Log Buffer (2097152 bytes):

RP/0/RP0/CPU0:Sep  9 23:11:31.109 UTC: logger[67965]: %OS-SYSLOG-6-LOG_INFO : informational STEP2-BEGIN 
RP/0/RP0/CPU0:Sep  9 23:11:31.348 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[6479]: Received disconnect from 10.100.3.1 port 63510:11: disconnected by user 
RP/0/RP0/CPU0:Sep  9 23:11:31.348 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[6479]: Disconnected from user cisco 10.100.3.1 port 63510 
RP/0/RP0/CPU0:Sep  9 23:12:19.928 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[6590]: Connection closed by 10.100.3.1 port 63525 
RP/0/RP0/CPU0:Sep  9 23:16:19.600 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-3-ERR_GENERAL : sshd[4493]: Incoming SSH session rate limit exceeded 
RP/0/RP0/CPU0:Sep  9 23:16:19.935 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[6922]: Connection closed by 10.100.3.1 port 63600 
RP/0/RP0/CPU0:Sep  9 23:16:55.650 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[6970]: Accepted authentication/pam for cisco from 10.100.3.1 port 63668 ssh2 
RP/0/RP0/CPU0:Sep  9 23:16:57.711 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[6986]: Received disconnect from 10.100.3.1 port 63668:11: disconnected by user 
RP/0/RP0/CPU0:Sep  9 23:16:57.711 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[6986]: Disconnected from user cisco 10.100.3.1 port 63668 
RP/0/RP0/CPU0:Sep  9 23:17:07.221 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7046]: Accepted authentication/pam for cisco from 10.100.3.1 port 63670 ssh2 
RP/0/RP0/CPU0:Sep  9 23:17:10.113 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7051]: Received disconnect from 10.100.3.1 port 63670:11: disconnected by user 
RP/0/RP0/CPU0:Sep  9 23:17:10.113 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7051]: Disconnected from user cisco 10.100.3.1 port 63670 
RP/0/RP0/CPU0:Sep  9 23:17:17.602 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7115]: Accepted authentication/pam for cisco from 10.100.3.1 port 63671 ssh2 
RP/0/RP0/CPU0:Sep  9 23:17:20.604 UTC: bgp[1084]: %ROUTING-BGP-5-ADJCHANGE : neighbor 10.1.2.2 Down - Neighbor local address configuration changed (VRF: default) (AS: 65002) 
RP/0/RP0/CPU0:Sep  9 23:17:20.605 UTC: bgp[1084]: %ROUTING-BGP-5-NSR_STATE_CHANGE : Changed state to NSR-Ready 
RP/0/RP0/CPU0:Sep  9 23:17:20.922 UTC: config[68610]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000008' to view the changes. 
RP/0/RP0/CPU0:Sep  9 23:17:21.061 UTC: config[68610]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.100.3.1) 
RP/0/RP0/CPU0:Sep  9 23:17:21.420 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7121]: Received disconnect from 10.100.3.1 port 63671:11: disconnected by user 
RP/0/RP0/CPU0:Sep  9 23:17:21.421 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7121]: Disconnected from user cisco 10.100.3.1 port 63671 
RP/0/RP0/CPU0:Sep  9 23:19:01.968 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7334]: Accepted authentication/pam for cisco from 10.100.3.1 port 63690 ssh2 
RP/0/RP0/CPU0:Sep  9 23:19:05.352 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7339]: Received disconnect from 10.100.3.1 port 63690:11: disconnected by user 
RP/0/RP0/CPU0:Sep  9 23:19:05.352 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7339]: Disconnected from user cisco 10.100.3.1 port 63690 
RP/0/RP0/CPU0:Sep  9 23:19:31.878 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7407]: Accepted authentication/pam for cisco from 10.100.3.1 port 63696 ssh2 
RP/0/RP0/CPU0:Sep  9 23:19:42.312 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7412]: Received disconnect from 10.100.3.1 port 63696:11: disconnected by user 
RP/0/RP0/CPU0:Sep  9 23:19:42.312 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7412]: Disconnected from user cisco 10.100.3.1 port 63696 
RP/0/RP0/CPU0:Sep  9 23:19:43.059 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7580]: Accepted authentication/pam for cisco from 10.100.3.1 port 63710 ssh2