RP/0/RP0/CPU0:R2#show logging start Sep 10 00:08:35
Thu Sep 10 01:08:15.609 UTC
Time Zone UTC, DST disabled
Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns)
    Console logging: Disabled
    Monitor logging: level debugging, 0 messages logged
    Trap logging: level informational, 0 messages logged
    Buffer logging: level debugging, 63 messages logged

Log Buffer (2097152 bytes):

RP/0/RP0/CPU0:Sep 10 00:49:29.073 UTC: syslogd[274]: %SECURITY-XR_SSL-6-INFO : XR SSL info: Setting fips register 
RP/0/RP0/CPU0:Sep 10 00:49:34.210 UTC: shelfmgr[259]: %PLATFORM-SHELFMGR-6-INFO_LOG : 0/RP0 serial #: VSN-60FH6HZ 
RP/0/RP0/CPU0:Sep 10 00:50:08.762 UTC: ifmgr[155]: %PKT_INFRA-IFMGR-6-NODE_STATE_CHANGE : Node 0/RP0/CPU0 state is connected.  
RP/0/RP0/CPU0:Sep 10 00:50:54.465 UTC: pim6[1166]: %ROUTING-PIM-5-HA_NOTICE : NSR not ready 
RP/0/RP0/CPU0:Sep 10 00:50:54.664 UTC: pim[1165]: %ROUTING-PIM-5-HA_NOTICE : NSR not ready 
RP/0/RP0/CPU0:Sep 10 00:50:55.262 UTC: ipsec_mp[195]: %SECURITY-IMP-6-PROC_READY : Process ipsec_mp is ready 
RP/0/RP0/CPU0:Sep 10 00:50:56.473 UTC: cepki[261]: %SECURITY-CEPKI-6-INFO : certificate database updated 
RP/0/RP0/CPU0:Sep 10 00:51:03.364 UTC: smartlicserver[157]: %LICENSE-SMART_LIC-6-AGENT_ENABLED : Smart Agent for Licensing is enabled  
RP/0/RP0/CPU0:Sep 10 00:51:11.274 UTC: script_agent_main[219]: %OS-SCRIPT_MGMT-6-PROCESS_START : ScriptAgent: Start :: Mode: Active 
RP/0/RP0/CPU0:Sep 10 00:51:12.560 UTC: script_watcher_main[164]: %OS-SCRIPT_MGMT-6-PROCESS_START : ScriptWatcher: Start :: Mode: Active 
RP/0/RP0/CPU0:Sep 10 00:51:15.060 UTC: shelfmgr[259]: %PLATFORM-SHELFMGR-6-INFO_LOG : 0/RP0/CPU0 is operational 
RP/0/RP0/CPU0:Sep 10 00:51:15.672 UTC: pyztp2[140]: %INFRA-ZTP-7-NOT_CONFIGURED : ZTP is not configured to run 
RP/0/RP0/CPU0:Sep 10 00:51:15.677 UTC: pyztp2[140]: %INFRA-ZTP-4-EXITED : ZTP exited 
RP/0/RP0/CPU0:Sep 10 00:51:17.059 UTC: sys_rec[1189]: %SECURITY-SYSTEM_RECOVERY-6-DISABLED : System recovery disabled 
RP/0/RP0/CPU0:Sep 10 00:51:17.561 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : SSH syslog proxy has started 
RP/0/RP0/CPU0:Sep 10 00:51:32.078 UTC: syslogd[274]: %OS-SYSLOG-6-CONFIG_COMMIT : Logging Configuration 'logging console disable' got committed 
RP/0/RP0/CPU0:Sep 10 00:51:32.473 UTC: ospf[1035]: %ROUTING-OSPF-5-HA_NOTICE_START : Starting OSPF 
RP/0/RP0/CPU0:Sep 10 00:51:34.267 UTC: locald_DLRSC[313]: %SECURITY-LOCALD-6-USER_PASSWORD_UPDATED : User 'cisco' password is configured or updated 
RP/0/RP0/CPU0:Sep 10 00:51:35.479 UTC: ospf[1035]: %ROUTING-OSPF-6-HA_INFO : Process 1: OSPF process initialization complete 
RP/0/RP0/CPU0:Sep 10 00:51:35.764 UTC: ospf[1035]: %ROUTING-OSPF-5-HA_NOTICE : Process 1: Signaled PROC_AVAILABLE 
RP/0/RP0/CPU0:Sep 10 00:51:40.610 UTC: ssh_conf_proxy[1185]: %SECURITY-MPP-6-MSG_INFO : Updated Management Plane configuration for service: ssh 
RP/0/RP0/CPU0:Sep 10 00:51:41.674 UTC: bpm[1099]: %ROUTING-BGP-5-ASYNC_IPC_STATUS : bpm-active:(bgp-bpm-active)inst-id 0, Service Published 
RP/0/RP0/CPU0:Sep 10 00:51:46.161 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[4417]: Server listening on 0.0.0.0 port 22. 
RP/0/RP0/CPU0:Sep 10 00:51:46.161 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[4417]: Server listening on :: port 22. 
RP/0/RP0/CPU0:Sep 10 00:51:48.377 UTC: bpm[1099]: %ROUTING-BGP-5-ASYNC_IPC_STATUS : bpm-default:(A)inst-id 0, Connection Open 
RP/0/RP0/CPU0:Sep 10 00:51:48.674 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[4444]: Server listening on 0.0.0.0 port 22. 
RP/0/RP0/CPU0:Sep 10 00:51:48.674 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[4444]: Server listening on :: port 22. 
RP/0/RP0/CPU0:Sep 10 00:51:49.076 UTC: bgp[1084]: %ROUTING-BGP-5-ASYNC_IPC_STATUS : default, process instance 1:(A)inst-id 0, Connection Established 
RP/0/RP0/CPU0:Sep 10 00:51:49.376 UTC: bgp[1084]: %ROUTING-BGP-5-ASYNC_IPC_STATUS : default:(A)inst-id 0, Initial Config Done 
RP/0/RP0/CPU0:Sep 10 00:51:50.363 UTC: cepki[261]: %SECURITY-CEPKI-6-KEY_INFO : One or more host keypairs exist. Not auto-generating keypairs. 
RP/0/RP0/CPU0:Sep 10 00:51:51.159 UTC: smartlicserver[157]: %LICENSE-SMART_LIC-6-REPORTING_REQUIRED : A Usage report acknowledgement will be required in 89 days. 
RP/0/RP0/CPU0:Sep 10 00:51:51.261 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface MgmtEth0/RP0/CPU0/0, changed state to Down 
RP/0/RP0/CPU0:Sep 10 00:51:51.261 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface MgmtEth0/RP0/CPU0/0, changed state to Down 
RP/0/RP0/CPU0:Sep 10 00:51:51.266 UTC: cfgmgr-rp[243]: %MGBL-CONFIG-6-OIR_RESTORE : Configuration for node '0/0/0' has been restored. 
RP/0/RP0/CPU0:Sep 10 00:51:51.378 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface MgmtEth0/RP0/CPU0/0, changed state to Up 
RP/0/RP0/CPU0:Sep 10 00:51:51.460 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface MgmtEth0/RP0/CPU0/0, changed state to Up 
RP/0/RP0/CPU0:Sep 10 00:51:51.662 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/0, changed state to Down 
RP/0/RP0/CPU0:Sep 10 00:51:51.662 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/0, changed state to Down 
RP/0/RP0/CPU0:Sep 10 00:51:51.662 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/1, changed state to Down 
RP/0/RP0/CPU0:Sep 10 00:51:51.662 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/1, changed state to Down 
RP/0/RP0/CPU0:Sep 10 00:51:51.662 UTC: ifmgr[155]: %PKT_INFRA-LINK-5-CHANGED : Interface GigabitEthernet0/0/0/2, changed state to Administratively Down 
RP/0/RP0/CPU0:Sep 10 00:51:51.870 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/0, changed state to Up 
RP/0/RP0/CPU0:Sep 10 00:51:51.872 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/1, changed state to Up 
RP/0/RP0/CPU0:Sep 10 00:51:51.873 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/0, changed state to Up 
RP/0/RP0/CPU0:Sep 10 00:51:51.877 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/1, changed state to Up 
RP/0/RP0/CPU0:Sep 10 00:51:52.067 UTC: plat_sl_client[204]: %LICENSE-PLAT_CLIENT-6-STATE_CHANGE : Licensing platform state changing from UNKNOWN to ENABLED 
RP/0/RP0/CPU0:Sep 10 00:51:55.413 UTC: bgp[1084]: %ROUTING-BGP-5-ADJCHANGE : neighbor 10.1.2.1 Up (VRF: default) (AS: 65001) 
RP/0/RP0/CPU0:Sep 10 00:51:55.414 UTC: bgp[1084]: %ROUTING-BGP-5-NSR_STATE_CHANGE : Changed state to Not NSR-Ready 
RP/0/RP0/CPU0:Sep 10 00:51:56.983 UTC: bgp[1084]: %ROUTING-BGP-5-ADJCHANGE : neighbor 2001:db8:12::1 Up (VRF: default) (AS: 65001) 
RP/0/RP0/CPU0:Sep 10 00:51:57.112 UTC: bgp[1084]: %ROUTING-BGP-5-ADJCHANGE : neighbor 2001:db8::3 Up (VRF: default) (AS: 65002) 
RP/0/RP0/CPU0:Sep 10 00:51:57.291 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 10.0.0.3 on GigabitEthernet0/0/0/1 in area 0 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 
RP/0/RP0/CPU0:Sep 10 00:52:00.571 UTC: bgp[1084]: %ROUTING-BGP-5-ADJCHANGE : neighbor 10.0.0.3 Up (VRF: default) (AS: 65002) 
RP/0/RP0/CPU0:Sep 10 00:52:30.172 UTC: smartlicserver[157]: %LICENSE-SMART_LIC-3-COMM_FAILED : Communications failure with the Cisco Smart License Utility (CSLU) : Unable to resolve server hostname/domain name  
RP/0/RP0/CPU0:Sep 10 00:54:12.820 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[5065]: Accepted authentication/pam for cisco from 10.100.3.1 port 51093 ssh2 
RP/0/RP0/CPU0:Sep 10 00:54:16.366 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[5070]: Received disconnect from 10.100.3.1 port 51093:11: disconnected by user 
RP/0/RP0/CPU0:Sep 10 00:54:16.366 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[5070]: Disconnected from user cisco 10.100.3.1 port 51093 
RP/0/RP0/CPU0:Sep 10 00:54:45.724 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[5143]: Connection closed by 10.100.3.1 port 51110 
RP/0/RP0/CPU0:Sep 10 01:04:58.646 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[5959]: Connection closed by 10.100.3.1 port 51407 
RP/0/RP0/CPU0:Sep 10 01:07:31.097 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[6173]: Connection closed by 10.100.3.1 port 51519 
RP/0/RP0/CPU0:Sep 10 01:07:57.668 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[6184]: Accepted authentication/pam for cisco from 10.100.3.1 port 51555 ssh2 
RP/0/RP0/CPU0:Sep 10 01:08:12.510 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[6189]: Received disconnect from 10.100.3.1 port 51555:11: disconnected by user 
RP/0/RP0/CPU0:Sep 10 01:08:12.510 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[6189]: Disconnected from user cisco 10.100.3.1 port 51555 
RP/0/RP0/CPU0:Sep 10 01:08:13.903 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[6439]: Accepted authentication/pam for cisco from 10.100.3.1 port 51565 ssh2