RP/0/RP0/CPU0:R1#show logging
Thu Sep 10 10:23:37.036 UTC
Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns)
    Console logging: Disabled
    Monitor logging: level debugging, 0 messages logged
    Trap logging: level informational, 0 messages logged
    Buffer logging: level debugging, 70 messages logged

Log Buffer (2097152 bytes):

RP/0/RP0/CPU0:Sep 10 10:11:54.454 UTC: syslogd[274]: %SECURITY-XR_SSL-6-INFO : XR SSL info: Setting fips register 
RP/0/RP0/CPU0:Sep 10 10:11:59.250 UTC: shelfmgr[259]: %PLATFORM-SHELFMGR-6-INFO_LOG : 0/RP0 serial #: VSN-FQJFHX1 
RP/0/RP0/CPU0:Sep 10 10:12:34.026 UTC: ifmgr[155]: %PKT_INFRA-IFMGR-6-NODE_STATE_CHANGE : Node 0/RP0/CPU0 state is connected.  
RP/0/RP0/CPU0:Sep 10 10:13:22.034 UTC: ipsec_mp[195]: %SECURITY-IMP-6-PROC_READY : Process ipsec_mp is ready 
RP/0/RP0/CPU0:Sep 10 10:13:22.124 UTC: pim6[1166]: %ROUTING-PIM-5-HA_NOTICE : NSR not ready 
RP/0/RP0/CPU0:Sep 10 10:13:22.227 UTC: pim[1165]: %ROUTING-PIM-5-HA_NOTICE : NSR not ready 
RP/0/RP0/CPU0:Sep 10 10:13:23.538 UTC: cepki[261]: %SECURITY-CEPKI-6-INFO : certificate database updated 
RP/0/RP0/CPU0:Sep 10 10:13:26.124 UTC: processmgr[51]: %OS-SYSMGR-7-DEBUG : policy_repository(1) (jid 1156) did not signal end of initialization   
RP/0/RP0/CPU0:Sep 10 10:13:26.523 UTC: sysmgr_log[69255]: %OS-SYSMGR-7-CHECK_LOG : /pkg/bin/sysmgr_debug_script invoked for : (policy_repository) process did not signal EOI  Output is in /var/log/sysmgr_debug/debug.node0_RP0_CPU0.3713.log 
RP/0/RP0/CPU0:Sep 10 10:13:27.224 UTC: processmgr[51]: %OS-SYSMGR-6-INFO : EOI received for process policy_repository,with pid 2535 
RP/0/RP0/CPU0:Sep 10 10:13:31.028 UTC: smartlicserver[157]: %LICENSE-SMART_LIC-6-AGENT_ENABLED : Smart Agent for Licensing is enabled  
RP/0/RP0/CPU0:Sep 10 10:13:39.126 UTC: script_agent_main[219]: %OS-SCRIPT_MGMT-6-PROCESS_START : ScriptAgent: Start :: Mode: Active 
RP/0/RP0/CPU0:Sep 10 10:13:39.826 UTC: script_watcher_main[164]: %OS-SCRIPT_MGMT-6-PROCESS_START : ScriptWatcher: Start :: Mode: Active 
RP/0/RP0/CPU0:Sep 10 10:13:43.433 UTC: shelfmgr[259]: %PLATFORM-SHELFMGR-6-INFO_LOG : 0/RP0/CPU0 is operational 
RP/0/RP0/CPU0:Sep 10 10:13:44.030 UTC: pyztp2[140]: %INFRA-ZTP-7-NOT_CONFIGURED : ZTP is not configured to run 
RP/0/RP0/CPU0:Sep 10 10:13:44.036 UTC: pyztp2[140]: %INFRA-ZTP-4-EXITED : ZTP exited 
RP/0/RP0/CPU0:Sep 10 10:13:45.423 UTC: sys_rec[1189]: %SECURITY-SYSTEM_RECOVERY-6-DISABLED : System recovery disabled 
RP/0/RP0/CPU0:Sep 10 10:13:45.523 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : SSH syslog proxy has started 
RP/0/RP0/CPU0:Sep 10 10:13:59.923 UTC: syslogd[274]: %OS-SYSLOG-6-CONFIG_COMMIT : Logging Configuration 'logging console disable' got committed 
RP/0/RP0/CPU0:Sep 10 10:14:00.129 UTC: ospf[1035]: %ROUTING-OSPF-5-HA_NOTICE_START : Starting OSPF 
RP/0/RP0/CPU0:Sep 10 10:14:02.132 UTC: locald_DLRSC[313]: %SECURITY-LOCALD-6-USER_PASSWORD_UPDATED : User 'cisco' password is configured or updated 
RP/0/RP0/CPU0:Sep 10 10:14:03.046 UTC: ospf[1035]: %ROUTING-OSPF-6-HA_INFO : Process 1: OSPF process initialization complete 
RP/0/RP0/CPU0:Sep 10 10:14:03.324 UTC: ospf[1035]: %ROUTING-OSPF-5-HA_NOTICE : Process 1: Signaled PROC_AVAILABLE 
RP/0/RP0/CPU0:Sep 10 10:14:03.831 UTC: locald_DLRSC[313]: %SECURITY-LOCALD-6-USER_PASSWORD_UPDATED : User 'admin' password is configured or updated 
RP/0/RP0/CPU0:Sep 10 10:14:04.939 UTC: locald_DLRSC[313]: %SECURITY-LOCALD-6-USER_PASSWORD_UPDATED : User 'lab' password is configured or updated 
RP/0/RP0/CPU0:Sep 10 10:14:09.229 UTC: ssh_conf_proxy[1185]: %SECURITY-MPP-6-MSG_INFO : Updated Management Plane configuration for service: ssh 
RP/0/RP0/CPU0:Sep 10 10:14:10.151 UTC: bpm[1099]: %ROUTING-BGP-5-ASYNC_IPC_STATUS : bpm-active:(bgp-bpm-active)inst-id 0, Service Published 
RP/0/RP0/CPU0:Sep 10 10:14:15.328 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[4601]: Server listening on 0.0.0.0 port 22. 
RP/0/RP0/CPU0:Sep 10 10:14:15.328 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[4601]: Server listening on :: port 22. 
RP/0/RP0/CPU0:Sep 10 10:14:17.633 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[4630]: Server listening on 0.0.0.0 port 22. 
RP/0/RP0/CPU0:Sep 10 10:14:17.633 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[4630]: Server listening on :: port 22. 
RP/0/RP0/CPU0:Sep 10 10:14:17.738 UTC: bpm[1099]: %ROUTING-BGP-5-ASYNC_IPC_STATUS : bpm-default:(A)inst-id 0, Connection Open 
RP/0/RP0/CPU0:Sep 10 10:14:19.034 UTC: bgp[1084]: %ROUTING-BGP-5-ASYNC_IPC_STATUS : default, process instance 1:(A)inst-id 0, Connection Established 
RP/0/RP0/CPU0:Sep 10 10:14:19.042 UTC: cepki[261]: %SECURITY-CEPKI-6-KEY_INFO : One or more host keypairs exist. Not auto-generating keypairs. 
RP/0/RP0/CPU0:Sep 10 10:14:19.640 UTC: smartlicserver[157]: %LICENSE-SMART_LIC-6-REPORTING_REQUIRED : A Usage report acknowledgement will be required in 89 days. 
RP/0/RP0/CPU0:Sep 10 10:14:19.735 UTC: bgp[1084]: %ROUTING-BGP-5-ASYNC_IPC_STATUS : default:(A)inst-id 0, Initial Config Done 
RP/0/RP0/CPU0:Sep 10 10:14:19.827 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface MgmtEth0/RP0/CPU0/0, changed state to Down 
RP/0/RP0/CPU0:Sep 10 10:14:19.827 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface MgmtEth0/RP0/CPU0/0, changed state to Down 
RP/0/RP0/CPU0:Sep 10 10:14:19.832 UTC: cfgmgr-rp[243]: %MGBL-CONFIG-6-OIR_RESTORE : Configuration for node '0/0/0' has been restored. 
RP/0/RP0/CPU0:Sep 10 10:14:20.026 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface MgmtEth0/RP0/CPU0/0, changed state to Up 
RP/0/RP0/CPU0:Sep 10 10:14:20.028 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface MgmtEth0/RP0/CPU0/0, changed state to Up 
RP/0/RP0/CPU0:Sep 10 10:14:20.036 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/0, changed state to Down 
RP/0/RP0/CPU0:Sep 10 10:14:20.036 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/0, changed state to Down 
RP/0/RP0/CPU0:Sep 10 10:14:20.036 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/1, changed state to Down 
RP/0/RP0/CPU0:Sep 10 10:14:20.036 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/1, changed state to Down 
RP/0/RP0/CPU0:Sep 10 10:14:20.036 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/2, changed state to Down 
RP/0/RP0/CPU0:Sep 10 10:14:20.036 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/2, changed state to Down 
RP/0/RP0/CPU0:Sep 10 10:14:20.324 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/0, changed state to Up 
RP/0/RP0/CPU0:Sep 10 10:14:20.326 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/1, changed state to Up 
RP/0/RP0/CPU0:Sep 10 10:14:20.329 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/2, changed state to Up 
RP/0/RP0/CPU0:Sep 10 10:14:20.330 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/0, changed state to Up 
RP/0/RP0/CPU0:Sep 10 10:14:20.333 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/1, changed state to Up 
RP/0/RP0/CPU0:Sep 10 10:14:20.339 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/2, changed state to Up 
RP/0/RP0/CPU0:Sep 10 10:14:20.625 UTC: plat_sl_client[204]: %LICENSE-PLAT_CLIENT-6-STATE_CHANGE : Licensing platform state changing from UNKNOWN to ENABLED 
RP/0/RP0/CPU0:Sep 10 10:14:58.654 UTC: smartlicserver[157]: %LICENSE-SMART_LIC-3-COMM_FAILED : Communications failure with the Cisco Smart License Utility (CSLU) : Unable to resolve server hostname/domain name  
RP/0/RP0/CPU0:Sep 10 10:16:24.357 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 10.0.0.3 on GigabitEthernet0/0/0/0 in area 0 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 
RP/0/RP0/CPU0:Sep 10 10:16:28.376 UTC: bgp[1084]: %ROUTING-BGP-5-ADJCHANGE : neighbor 10.0.0.3 Up (VRF: default) (AS: 65001) 
RP/0/RP0/CPU0:Sep 10 10:16:28.377 UTC: bgp[1084]: %ROUTING-BGP-5-NSR_STATE_CHANGE : Changed state to Not NSR-Ready 
RP/0/RP0/CPU0:Sep 10 10:16:43.665 UTC: bgp[1084]: %ROUTING-BGP-5-ADJCHANGE : neighbor 10.0.0.2 Up (VRF: default) (AS: 65001) 
RP/0/RP0/CPU0:Sep 10 10:17:29.588 UTC: bgp[1084]: %ROUTING-BGP-5-ADJCHANGE : neighbor 10.1.4.4 Up (VRF: default) (AS: 65002) 
RP/0/RP0/CPU0:Sep 10 10:19:08.662 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[5449]: Connection closed by 10.100.3.1 port 56069 
RP/0/RP0/CPU0:Sep 10 10:19:33.598 UTC: bgp[1084]: %ROUTING-BGP-5-ADJCHANGE : neighbor 10.1.6.6 Up (VRF: default) (AS: 65004) 
RP/0/RP0/CPU0:Sep 10 10:19:44.307 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[5510]: Accepted authentication/pam for cisco from 10.100.3.1 port 56077 ssh2 
RP/0/RP0/CPU0:Sep 10 10:19:46.125 UTC: logger[67005]: %OS-SYSLOG-6-LOG_INFO : informational STEP6-BEGIN 
RP/0/RP0/CPU0:Sep 10 10:19:46.461 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[5519]: Received disconnect from 10.100.3.1 port 56077:11: disconnected by user 
RP/0/RP0/CPU0:Sep 10 10:19:46.461 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[5519]: Disconnected from user cisco 10.100.3.1 port 56077 
RP/0/RP0/CPU0:Sep 10 10:23:20.103 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[5828]: Accepted authentication/pam for cisco from 10.100.3.1 port 56131 ssh2 
RP/0/RP0/CPU0:Sep 10 10:23:33.681 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[5833]: Received disconnect from 10.100.3.1 port 56131:11: disconnected by user 
RP/0/RP0/CPU0:Sep 10 10:23:33.681 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[5833]: Disconnected from user cisco 10.100.3.1 port 56131 
RP/0/RP0/CPU0:Sep 10 10:23:34.663 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[6013]: Accepted authentication/pam for cisco from 10.100.3.1 port 56133 ssh2