RP/0/RP0/CPU0:R1#show logging start Sep 15 11:59:37
Tue Sep 15 12:06:23.876 UTC
Time Zone UTC, DST disabled
Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns)
    Console logging: Disabled
    Monitor logging: level debugging, 0 messages logged
    Trap logging: level informational, 0 messages logged
    Buffer logging: level debugging, 118 messages logged

Log Buffer (2097152 bytes):

RP/0/RP0/CPU0:Sep 15 11:59:37.377 UTC: logger[68731]: %OS-SYSLOG-6-LOG_INFO : informational STEP9-BEGIN 
RP/0/RP0/CPU0:Sep 15 11:59:37.676 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7244]: Received disconnect from 10.100.3.1 port 50542:11: disconnected by user 
RP/0/RP0/CPU0:Sep 15 11:59:37.676 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7244]: Disconnected from user cisco 10.100.3.1 port 50542 
RP/0/RP0/CPU0:Sep 15 12:03:49.774 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7618]: Accepted authentication/pam for cisco from 10.100.3.1 port 50725 ssh2 
RP/0/RP0/CPU0:Sep 15 12:03:53.858 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/1, changed state to Down 
RP/0/RP0/CPU0:Sep 15 12:03:53.858 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/1, changed state to Down 
RP/0/RP0/CPU0:Sep 15 12:03:53.873 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/1, changed state to Up 
RP/0/RP0/CPU0:Sep 15 12:03:53.949 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/1, changed state to Up 
RP/0/RP0/CPU0:Sep 15 12:03:54.291 UTC: config[69120]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000015' to view the changes. 
RP/0/RP0/CPU0:Sep 15 12:03:54.466 UTC: config[69120]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.100.3.1) 
RP/0/RP0/CPU0:Sep 15 12:03:56.255 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 10.0.0.3 on GigabitEthernet0/0/0/1 in area 0 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 
RP/0/RP0/CPU0:Sep 15 12:03:56.771 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7627]: Received disconnect from 10.100.3.1 port 50725:11: disconnected by user 
RP/0/RP0/CPU0:Sep 15 12:03:56.771 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7627]: Disconnected from user cisco 10.100.3.1 port 50725 
RP/0/RP0/CPU0:Sep 15 12:05:57.376 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7886]: Accepted authentication/pam for cisco from 10.100.3.1 port 50801 ssh2 
RP/0/RP0/CPU0:Sep 15 12:06:20.901 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7891]: Received disconnect from 10.100.3.1 port 50801:11: disconnected by user 
RP/0/RP0/CPU0:Sep 15 12:06:20.901 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7891]: Disconnected from user cisco 10.100.3.1 port 50801 
RP/0/RP0/CPU0:Sep 15 12:06:21.855 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[8107]: Accepted authentication/pam for cisco from 10.100.3.1 port 50822 ssh2