RP/0/RP0/CPU0:PE2#show logging start Sep 10 04:23:46
Thu Sep 10 04:36:28.203 UTC
Time Zone UTC, DST disabled
Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns)
    Console logging: Disabled
    Monitor logging: level debugging, 0 messages logged
    Trap logging: level informational, 0 messages logged
    Buffer logging: level debugging, 89 messages logged

Log Buffer (2097152 bytes):

RP/0/RP0/CPU0:Sep 10 04:23:46.605 UTC: logger[67708]: %OS-SYSLOG-6-LOG_INFO : informational STEP1-BEGIN 
RP/0/RP0/CPU0:Sep 10 04:23:46.897 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[6222]: Received disconnect from 10.100.3.1 port 60905:11: disconnected by user 
RP/0/RP0/CPU0:Sep 10 04:23:46.897 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[6222]: Disconnected from user cisco 10.100.3.1 port 60905 
RP/0/RP0/CPU0:Sep 10 04:24:52.403 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[6343]: Accepted authentication/pam for cisco from 10.100.3.1 port 60947 ssh2 
RP/0/RP0/CPU0:Sep 10 04:24:54.887 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[6348]: Received disconnect from 10.100.3.1 port 60947:11: disconnected by user 
RP/0/RP0/CPU0:Sep 10 04:24:54.887 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[6348]: Disconnected from user cisco 10.100.3.1 port 60947 
RP/0/RP0/CPU0:Sep 10 04:25:59.299 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 4.4.4.4:0 is DOWN (Discovery Hello Hold Timer expired) 
RP/0/RP0/CPU0:Sep 10 04:26:22.167 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 4.4.4.4 on GigabitEthernet0/0/0/0 in area 0 from FULL to DOWN, Neighbor Down: dead timer expired, vrf default vrfid 0x60000000 
RP/0/RP0/CPU0:Sep 10 04:28:36.021 UTC: bgp[1084]: %ROUTING-BGP-5-ADJCHANGE : neighbor 2.2.2.2 Down - BGP Notification sent, hold time expired (VRF: default) (AS: 65001) 
RP/0/RP0/CPU0:Sep 10 04:28:43.370 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 4.4.4.4 on GigabitEthernet0/0/0/0 in area 0 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 
RP/0/RP0/CPU0:Sep 10 04:28:44.900 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 4.4.4.4:0 is UP (IPv4 connection) 
RP/0/RP0/CPU0:Sep 10 04:29:05.343 UTC: bgp[1084]: %ROUTING-BGP-5-ADJCHANGE : neighbor 2.2.2.2 Up (VRF: default) (AS: 65001) 
RP/0/RP0/CPU0:Sep 10 04:36:10.777 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7296]: Accepted authentication/pam for cisco from 10.100.3.1 port 61572 ssh2 
RP/0/RP0/CPU0:Sep 10 04:36:25.755 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7301]: Received disconnect from 10.100.3.1 port 61572:11: disconnected by user 
RP/0/RP0/CPU0:Sep 10 04:36:25.755 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7301]: Disconnected from user cisco 10.100.3.1 port 61572 
RP/0/RP0/CPU0:Sep 10 04:36:26.593 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7569]: Accepted authentication/pam for cisco from 10.100.3.1 port 61581 ssh2