RP/0/RP0/CPU0:PE1#show logging start Sep 12 03:40:23
Sat Sep 12 03:47:19.065 UTC
Time Zone UTC, DST disabled
Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns)
    Console logging: Disabled
    Monitor logging: level debugging, 0 messages logged
    Trap logging: level informational, 0 messages logged
    Buffer logging: level debugging, 385 messages logged

Log Buffer (2097152 bytes):

RP/0/RP0/CPU0:Sep 12 03:40:23.932 UTC: logger[68971]: %OS-SYSLOG-6-LOG_INFO : informational STEP3-BEGIN 
RP/0/RP0/CPU0:Sep 12 03:40:24.306 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[19768]: Received disconnect from 10.100.3.1 port 56921:11: disconnected by user 
RP/0/RP0/CPU0:Sep 12 03:40:24.306 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[19768]: Disconnected from user cisco 10.100.3.1 port 56921 
RP/0/RP0/CPU0:Sep 12 03:43:14.318 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[20040]: Accepted authentication/pam for cisco from 10.100.3.1 port 57100 ssh2 
RP/0/RP0/CPU0:Sep 12 03:43:17.520 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[20045]: Received disconnect from 10.100.3.1 port 57100:11: disconnected by user 
RP/0/RP0/CPU0:Sep 12 03:43:17.520 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[20045]: Disconnected from user cisco 10.100.3.1 port 57100 
RP/0/RP0/CPU0:Sep 12 03:43:31.601 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[20149]: Accepted authentication/pam for cisco from 10.100.3.1 port 57113 ssh2 
RP/0/RP0/CPU0:Sep 12 03:43:35.197 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 3.3.3.3:0 is DOWN (Session MD5 password changed) 
RP/0/RP0/CPU0:Sep 12 03:43:35.421 UTC: config[69355]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000007' to view the changes. 
RP/0/RP0/CPU0:Sep 12 03:43:35.548 UTC: config[69355]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.100.3.1) 
RP/0/RP0/CPU0:Sep 12 03:43:37.796 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[20154]: Received disconnect from 10.100.3.1 port 57113:11: disconnected by user 
RP/0/RP0/CPU0:Sep 12 03:43:37.796 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[20154]: Disconnected from user cisco 10.100.3.1 port 57113 
RP/0/RP0/CPU0:Sep 12 03:43:38.772 UTC: tcp[134]: %IP-TCP-3-NOAUTH : Authentication info not programmed for the packet received from 3.3.3.3:34800 to 2.2.2.2:646 
RP/0/RP0/CPU0:Sep 12 03:43:43.122 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 3.3.3.3:0 is UP (IPv4 connection) 
RP/0/RP0/CPU0:Sep 12 03:47:01.334 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[20493]: Accepted authentication/pam for cisco from 10.100.3.1 port 57389 ssh2 
RP/0/RP0/CPU0:Sep 12 03:47:16.131 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[20498]: Received disconnect from 10.100.3.1 port 57389:11: disconnected by user 
RP/0/RP0/CPU0:Sep 12 03:47:16.131 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[20498]: Disconnected from user cisco 10.100.3.1 port 57389 
RP/0/RP0/CPU0:Sep 12 03:47:17.028 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[20731]: Accepted authentication/pam for cisco from 10.100.3.1 port 57396 ssh2