RP/0/RP0/CPU0:P1#show logging start Sep 27 19:20:13 Sun Sep 27 19:29:37.820 UTC Time Zone UTC, DST disabled Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns) Console logging: Disabled Monitor logging: level debugging, 0 messages logged Trap logging: level informational, 0 messages logged Buffer logging: level debugging, 157 messages logged Log Buffer (2097152 bytes): RP/0/RP0/CPU0:Sep 27 19:20:13.452 UTC: logger[68507]: %OS-SYSLOG-6-LOG_INFO : informational STEP10-BEGIN RP/0/RP0/CPU0:Sep 27 19:20:13.752 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7016]: Received disconnect from 10.20.1.1 port 39504:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:20:13.753 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7016]: Disconnected from user cisco 10.20.1.1 port 39504 RP/0/RP0/CPU0:Sep 27 19:22:48.071 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7260]: Accepted authentication/pam for cisco from 10.20.1.1 port 35024 ssh2 RP/0/RP0/CPU0:Sep 27 19:22:51.711 UTC: config[68754]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000019' to view the changes. RP/0/RP0/CPU0:Sep 27 19:22:51.825 UTC: config[68754]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.20.1.1) RP/0/RP0/CPU0:Sep 27 19:22:53.739 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7265]: Received disconnect from 10.20.1.1 port 35024:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:22:53.739 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7265]: Disconnected from user cisco 10.20.1.1 port 35024 RP/0/RP0/CPU0:Sep 27 19:23:06.466 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 2.2.2.2:0 is DOWN (Received Notification message from peer: Hold Timer Expired) RP/0/RP0/CPU0:Sep 27 19:23:09.224 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7382]: Accepted authentication/pam for cisco from 10.20.1.1 port 56884 ssh2 RP/0/RP0/CPU0:Sep 27 19:23:12.813 UTC: ifmgr[155]: %PKT_INFRA-LINK-5-CHANGED : Interface GigabitEthernet0/0/0/0, changed state to Administratively Down RP/0/RP0/CPU0:Sep 27 19:23:12.815 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 2.2.2.2 on GigabitEthernet0/0/0/0 in area 0 from FULL to DOWN, Neighbor Down: interface down or detached, vrf default vrfid 0x60000000 RP/0/RP0/CPU0:Sep 27 19:23:13.053 UTC: config[68876]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000020' to view the changes. RP/0/RP0/CPU0:Sep 27 19:23:13.210 UTC: config[68876]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.20.1.1) RP/0/RP0/CPU0:Sep 27 19:23:14.854 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7387]: Received disconnect from 10.20.1.1 port 56884:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:23:14.854 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7387]: Disconnected from user cisco 10.20.1.1 port 56884 RP/0/RP0/CPU0:Sep 27 19:24:02.326 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7527]: Accepted authentication/pam for cisco from 10.20.1.1 port 43840 ssh2 RP/0/RP0/CPU0:Sep 27 19:24:05.630 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/0, changed state to Down RP/0/RP0/CPU0:Sep 27 19:24:05.630 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/0, changed state to Down RP/0/RP0/CPU0:Sep 27 19:24:05.705 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/0, changed state to Up RP/0/RP0/CPU0:Sep 27 19:24:05.707 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/0, changed state to Up RP/0/RP0/CPU0:Sep 27 19:24:06.005 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 2.2.2.2:0 is UP (IPv4 connection) RP/0/RP0/CPU0:Sep 27 19:24:06.208 UTC: config[69021]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000021' to view the changes. RP/0/RP0/CPU0:Sep 27 19:24:06.307 UTC: config[69021]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.20.1.1) RP/0/RP0/CPU0:Sep 27 19:24:08.006 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7532]: Received disconnect from 10.20.1.1 port 43840:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:24:08.006 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7532]: Disconnected from user cisco 10.20.1.1 port 43840 RP/0/RP0/CPU0:Sep 27 19:24:09.090 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 2.2.2.2 on GigabitEthernet0/0/0/0 in area 0 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 RP/0/RP0/CPU0:Sep 27 19:26:39.517 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7862]: Accepted authentication/pam for cisco from 10.20.1.1 port 43872 ssh2 RP/0/RP0/CPU0:Sep 27 19:26:41.576 UTC: logger[69356]: %OS-SYSLOG-6-LOG_INFO : informational STEP10-CLEAR: clear counters interface GigabitEthernet0/0/0/0 RP/0/RP0/CPU0:Sep 27 19:26:41.729 UTC: statsd_manager_l[244]: %MGBL-IFSTATS-6-CLEAR_COUNTERS : Clear counters on GigabitEthernet0/0/0/0 RP/0/RP0/CPU0:Sep 27 19:26:41.811 UTC: logger[69362]: %OS-SYSLOG-6-LOG_INFO : informational STEP10-CLEAR: clear counters interface GigabitEthernet0/0/0/1 RP/0/RP0/CPU0:Sep 27 19:26:42.006 UTC: statsd_manager_l[244]: %MGBL-IFSTATS-6-CLEAR_COUNTERS : Clear counters on GigabitEthernet0/0/0/1 RP/0/RP0/CPU0:Sep 27 19:26:42.108 UTC: logger[69368]: %OS-SYSLOG-6-LOG_INFO : informational STEP10-CLEAR: clear counters interface GigabitEthernet0/0/0/2 RP/0/RP0/CPU0:Sep 27 19:26:42.272 UTC: statsd_manager_l[244]: %MGBL-IFSTATS-6-CLEAR_COUNTERS : Clear counters on GigabitEthernet0/0/0/2 RP/0/RP0/CPU0:Sep 27 19:26:42.383 UTC: logger[69374]: %OS-SYSLOG-6-LOG_INFO : informational STEP10-CLEAR: clear mpls forwarding counters RP/0/RP0/CPU0:Sep 27 19:26:43.039 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7867]: Received disconnect from 10.20.1.1 port 43872:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:26:43.039 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7867]: Disconnected from user cisco 10.20.1.1 port 43872 RP/0/RP0/CPU0:Sep 27 19:27:18.435 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7958]: Accepted authentication/pam for cisco from 10.20.1.1 port 49088 ssh2 RP/0/RP0/CPU0:Sep 27 19:27:23.576 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7967]: Received disconnect from 10.20.1.1 port 49088:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:27:23.577 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7967]: Disconnected from user cisco 10.20.1.1 port 49088 RP/0/RP0/CPU0:Sep 27 19:29:15.128 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[8190]: Accepted authentication/pam for cisco from 10.20.1.1 port 51396 ssh2 RP/0/RP0/CPU0:Sep 27 19:29:34.928 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[8195]: Received disconnect from 10.20.1.1 port 51396:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:29:34.928 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[8195]: Disconnected from user cisco 10.20.1.1 port 51396 RP/0/RP0/CPU0:Sep 27 19:29:35.705 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[8528]: Accepted authentication/pam for cisco from 10.20.1.1 port 44572 ssh2