RP/0/RP0/CPU0:P1#show logging start Sep 27 19:29:48 Sun Sep 27 19:39:07.915 UTC Time Zone UTC, DST disabled Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns) Console logging: Disabled Monitor logging: level debugging, 0 messages logged Trap logging: level informational, 0 messages logged Buffer logging: level debugging, 210 messages logged Log Buffer (2097152 bytes): RP/0/RP0/CPU0:Sep 27 19:29:49.034 UTC: logger[66118]: %OS-SYSLOG-6-LOG_INFO : informational STEP11-BEGIN RP/0/RP0/CPU0:Sep 27 19:29:49.278 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[8728]: Received disconnect from 10.20.1.1 port 51924:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:29:49.278 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[8728]: Disconnected from user cisco 10.20.1.1 port 51924 RP/0/RP0/CPU0:Sep 27 19:32:21.783 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[8952]: Accepted authentication/pam for cisco from 10.20.1.1 port 48950 ssh2 RP/0/RP0/CPU0:Sep 27 19:32:25.727 UTC: config[66355]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000022' to view the changes. RP/0/RP0/CPU0:Sep 27 19:32:25.946 UTC: config[66355]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.20.1.1) RP/0/RP0/CPU0:Sep 27 19:32:27.523 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[8957]: Received disconnect from 10.20.1.1 port 48950:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:32:27.523 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[8957]: Disconnected from user cisco 10.20.1.1 port 48950 RP/0/RP0/CPU0:Sep 27 19:32:42.538 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9086]: Accepted authentication/pam for cisco from 10.20.1.1 port 42780 ssh2 RP/0/RP0/CPU0:Sep 27 19:32:46.268 UTC: ifmgr[155]: %PKT_INFRA-LINK-5-CHANGED : Interface GigabitEthernet0/0/0/0, changed state to Administratively Down RP/0/RP0/CPU0:Sep 27 19:32:46.305 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 2.2.2.2 on GigabitEthernet0/0/0/0 in area 0 from FULL to DOWN, Neighbor Down: interface down or detached, vrf default vrfid 0x60000000 RP/0/RP0/CPU0:Sep 27 19:32:46.308 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-SESSION_PROTECTION : VRF 'default' (0x60000000), Session hold up initiated for peer 2.2.2.2:0 RP/0/RP0/CPU0:Sep 27 19:32:46.715 UTC: config[66488]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000023' to view the changes. RP/0/RP0/CPU0:Sep 27 19:32:46.905 UTC: config[66488]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.20.1.1) RP/0/RP0/CPU0:Sep 27 19:32:48.649 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9091]: Received disconnect from 10.20.1.1 port 42780:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:32:48.649 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9091]: Disconnected from user cisco 10.20.1.1 port 42780 RP/0/RP0/CPU0:Sep 27 19:33:35.685 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9261]: Accepted authentication/pam for cisco from 10.20.1.1 port 58826 ssh2 RP/0/RP0/CPU0:Sep 27 19:33:39.022 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/0, changed state to Down RP/0/RP0/CPU0:Sep 27 19:33:39.022 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/0, changed state to Down RP/0/RP0/CPU0:Sep 27 19:33:39.037 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/0, changed state to Up RP/0/RP0/CPU0:Sep 27 19:33:39.039 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/0, changed state to Up RP/0/RP0/CPU0:Sep 27 19:33:39.113 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-SESSION_PROTECTION : VRF 'default' (0x60000000), Session recovery succeeded for peer 2.2.2.2:0 RP/0/RP0/CPU0:Sep 27 19:33:39.428 UTC: config[66659]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000024' to view the changes. RP/0/RP0/CPU0:Sep 27 19:33:39.550 UTC: config[66659]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.20.1.1) RP/0/RP0/CPU0:Sep 27 19:33:41.232 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9266]: Received disconnect from 10.20.1.1 port 58826:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:33:41.232 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9266]: Disconnected from user cisco 10.20.1.1 port 58826 RP/0/RP0/CPU0:Sep 27 19:33:42.305 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 2.2.2.2 on GigabitEthernet0/0/0/0 in area 0 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 RP/0/RP0/CPU0:Sep 27 19:36:13.165 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9518]: Accepted authentication/pam for cisco from 10.20.1.1 port 48786 ssh2 RP/0/RP0/CPU0:Sep 27 19:36:15.248 UTC: logger[66916]: %OS-SYSLOG-6-LOG_INFO : informational STEP11-CLEAR: clear counters interface GigabitEthernet0/0/0/0 RP/0/RP0/CPU0:Sep 27 19:36:15.416 UTC: statsd_manager_l[244]: %MGBL-IFSTATS-6-CLEAR_COUNTERS : Clear counters on GigabitEthernet0/0/0/0 RP/0/RP0/CPU0:Sep 27 19:36:15.541 UTC: logger[66922]: %OS-SYSLOG-6-LOG_INFO : informational STEP11-CLEAR: clear counters interface GigabitEthernet0/0/0/1 RP/0/RP0/CPU0:Sep 27 19:36:15.806 UTC: statsd_manager_l[244]: %MGBL-IFSTATS-6-CLEAR_COUNTERS : Clear counters on GigabitEthernet0/0/0/1 RP/0/RP0/CPU0:Sep 27 19:36:15.910 UTC: logger[66928]: %OS-SYSLOG-6-LOG_INFO : informational STEP11-CLEAR: clear counters interface GigabitEthernet0/0/0/2 RP/0/RP0/CPU0:Sep 27 19:36:16.055 UTC: statsd_manager_l[244]: %MGBL-IFSTATS-6-CLEAR_COUNTERS : Clear counters on GigabitEthernet0/0/0/2 RP/0/RP0/CPU0:Sep 27 19:36:16.228 UTC: logger[66934]: %OS-SYSLOG-6-LOG_INFO : informational STEP11-CLEAR: clear mpls forwarding counters RP/0/RP0/CPU0:Sep 27 19:36:16.928 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9523]: Received disconnect from 10.20.1.1 port 48786:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:36:16.928 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9523]: Disconnected from user cisco 10.20.1.1 port 48786 RP/0/RP0/CPU0:Sep 27 19:36:52.410 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9658]: Accepted authentication/pam for cisco from 10.20.1.1 port 40986 ssh2 RP/0/RP0/CPU0:Sep 27 19:36:57.522 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9663]: Received disconnect from 10.20.1.1 port 40986:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:36:57.522 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9663]: Disconnected from user cisco 10.20.1.1 port 40986 RP/0/RP0/CPU0:Sep 27 19:38:45.830 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9886]: Accepted authentication/pam for cisco from 10.20.1.1 port 47830 ssh2 RP/0/RP0/CPU0:Sep 27 19:39:05.048 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9891]: Received disconnect from 10.20.1.1 port 47830:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:39:05.049 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9891]: Disconnected from user cisco 10.20.1.1 port 47830 RP/0/RP0/CPU0:Sep 27 19:39:05.930 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10184]: Accepted authentication/pam for cisco from 10.20.1.1 port 51884 ssh2