RP/0/RP0/CPU0:PE1#show logging start Sep 27 19:28:35 Sun Sep 27 19:37:55.932 UTC Time Zone UTC, DST disabled Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns) Console logging: Disabled Monitor logging: level debugging, 0 messages logged Trap logging: level informational, 0 messages logged Buffer logging: level debugging, 256 messages logged Log Buffer (2097152 bytes): RP/0/RP0/CPU0:Sep 27 19:28:35.635 UTC: logger[67265]: %OS-SYSLOG-6-LOG_INFO : informational STEP11-BEGIN RP/0/RP0/CPU0:Sep 27 19:28:35.922 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9874]: Received disconnect from 10.20.1.1 port 53296:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:28:35.922 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9874]: Disconnected from user cisco 10.20.1.1 port 53296 RP/0/RP0/CPU0:Sep 27 19:32:15.396 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10168]: Accepted authentication/pam for cisco from 10.20.1.1 port 35454 ssh2 RP/0/RP0/CPU0:Sep 27 19:32:19.176 UTC: config[67581]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000022' to view the changes. RP/0/RP0/CPU0:Sep 27 19:32:19.322 UTC: config[67581]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.20.1.1) RP/0/RP0/CPU0:Sep 27 19:32:21.160 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10177]: Received disconnect from 10.20.1.1 port 35454:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:32:21.160 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10177]: Disconnected from user cisco 10.20.1.1 port 35454 RP/0/RP0/CPU0:Sep 27 19:32:36.299 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10305]: Accepted authentication/pam for cisco from 10.20.1.1 port 60518 ssh2 RP/0/RP0/CPU0:Sep 27 19:32:39.777 UTC: ifmgr[155]: %PKT_INFRA-LINK-5-CHANGED : Interface GigabitEthernet0/0/0/1, changed state to Administratively Down RP/0/RP0/CPU0:Sep 27 19:32:39.779 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 3.3.3.3 on GigabitEthernet0/0/0/1 in area 0 from FULL to DOWN, Neighbor Down: interface down or detached, vrf default vrfid 0x60000000 RP/0/RP0/CPU0:Sep 27 19:32:39.781 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-SESSION_PROTECTION : VRF 'default' (0x60000000), Session hold up initiated for peer 3.3.3.3:0 RP/0/RP0/CPU0:Sep 27 19:32:40.093 UTC: config[67703]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000023' to view the changes. RP/0/RP0/CPU0:Sep 27 19:32:40.270 UTC: config[67703]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.20.1.1) RP/0/RP0/CPU0:Sep 27 19:32:41.813 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10310]: Received disconnect from 10.20.1.1 port 60518:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:32:41.813 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10310]: Disconnected from user cisco 10.20.1.1 port 60518 RP/0/RP0/CPU0:Sep 27 19:33:29.300 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10477]: Accepted authentication/pam for cisco from 10.20.1.1 port 50642 ssh2 RP/0/RP0/CPU0:Sep 27 19:33:32.765 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/1, changed state to Down RP/0/RP0/CPU0:Sep 27 19:33:32.765 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/1, changed state to Down RP/0/RP0/CPU0:Sep 27 19:33:32.783 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/1, changed state to Up RP/0/RP0/CPU0:Sep 27 19:33:32.788 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/1, changed state to Up RP/0/RP0/CPU0:Sep 27 19:33:33.080 UTC: config[67875]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000024' to view the changes. RP/0/RP0/CPU0:Sep 27 19:33:33.207 UTC: config[67875]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.20.1.1) RP/0/RP0/CPU0:Sep 27 19:33:34.901 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10482]: Received disconnect from 10.20.1.1 port 50642:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:33:34.901 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10482]: Disconnected from user cisco 10.20.1.1 port 50642 RP/0/RP0/CPU0:Sep 27 19:33:39.109 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-SESSION_PROTECTION : VRF 'default' (0x60000000), Session recovery succeeded for peer 3.3.3.3:0 RP/0/RP0/CPU0:Sep 27 19:33:42.302 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 3.3.3.3 on GigabitEthernet0/0/0/1 in area 0 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 RP/0/RP0/CPU0:Sep 27 19:33:47.096 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10574]: Accepted authentication/pam for cisco from 10.20.1.1 port 50144 ssh2 RP/0/RP0/CPU0:Sep 27 19:33:50.503 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10579]: Received disconnect from 10.20.1.1 port 50144:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:33:50.503 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10579]: Disconnected from user cisco 10.20.1.1 port 50144 RP/0/RP0/CPU0:Sep 27 19:34:01.316 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10650]: Accepted authentication/pam for cisco from 10.20.1.1 port 33150 ssh2 RP/0/RP0/CPU0:Sep 27 19:34:04.600 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10655]: Received disconnect from 10.20.1.1 port 33150:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:34:04.600 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10655]: Disconnected from user cisco 10.20.1.1 port 33150 RP/0/RP0/CPU0:Sep 27 19:36:09.014 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10878]: Accepted authentication/pam for cisco from 10.20.1.1 port 60008 ssh2 RP/0/RP0/CPU0:Sep 27 19:36:11.005 UTC: logger[68279]: %OS-SYSLOG-6-LOG_INFO : informational STEP11-CLEAR: clear counters interface GigabitEthernet0/0/0/0 RP/0/RP0/CPU0:Sep 27 19:36:11.171 UTC: statsd_manager_l[244]: %MGBL-IFSTATS-6-CLEAR_COUNTERS : Clear counters on GigabitEthernet0/0/0/0 RP/0/RP0/CPU0:Sep 27 19:36:11.363 UTC: logger[68285]: %OS-SYSLOG-6-LOG_INFO : informational STEP11-CLEAR: clear counters interface GigabitEthernet0/0/0/1 RP/0/RP0/CPU0:Sep 27 19:36:11.504 UTC: statsd_manager_l[244]: %MGBL-IFSTATS-6-CLEAR_COUNTERS : Clear counters on GigabitEthernet0/0/0/1 RP/0/RP0/CPU0:Sep 27 19:36:11.592 UTC: logger[68291]: %OS-SYSLOG-6-LOG_INFO : informational STEP11-CLEAR: clear counters interface GigabitEthernet0/0/0/2 RP/0/RP0/CPU0:Sep 27 19:36:11.760 UTC: statsd_manager_l[244]: %MGBL-IFSTATS-6-CLEAR_COUNTERS : Clear counters on GigabitEthernet0/0/0/2 RP/0/RP0/CPU0:Sep 27 19:36:11.896 UTC: logger[68297]: %OS-SYSLOG-6-LOG_INFO : informational STEP11-CLEAR: clear mpls forwarding counters RP/0/RP0/CPU0:Sep 27 19:36:12.482 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10886]: Received disconnect from 10.20.1.1 port 60008:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:36:12.482 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10886]: Disconnected from user cisco 10.20.1.1 port 60008 RP/0/RP0/CPU0:Sep 27 19:36:45.839 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[11017]: Accepted authentication/pam for cisco from 10.20.1.1 port 50288 ssh2 RP/0/RP0/CPU0:Sep 27 19:36:51.624 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[11022]: Received disconnect from 10.20.1.1 port 50288:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:36:51.624 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[11022]: Disconnected from user cisco 10.20.1.1 port 50288 RP/0/RP0/CPU0:Sep 27 19:37:30.937 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[11153]: Accepted authentication/pam for cisco from 10.20.1.1 port 55920 ssh2 RP/0/RP0/CPU0:Sep 27 19:37:53.292 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[11158]: Received disconnect from 10.20.1.1 port 55920:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:37:53.292 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[11158]: Disconnected from user cisco 10.20.1.1 port 55920 RP/0/RP0/CPU0:Sep 27 19:37:54.107 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[11496]: Accepted authentication/pam for cisco from 10.20.1.1 port 42476 ssh2