RP/0/RP0/CPU0:P1#show logging start Sep 27 19:39:19 Sun Sep 27 19:48:40.310 UTC Time Zone UTC, DST disabled Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns) Console logging: Disabled Monitor logging: level debugging, 0 messages logged Trap logging: level informational, 0 messages logged Buffer logging: level debugging, 263 messages logged Log Buffer (2097152 bytes): RP/0/RP0/CPU0:Sep 27 19:39:19.100 UTC: logger[67780]: %OS-SYSLOG-6-LOG_INFO : informational STEP12-BEGIN RP/0/RP0/CPU0:Sep 27 19:39:19.434 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10384]: Received disconnect from 10.20.1.1 port 43868:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:39:19.434 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10384]: Disconnected from user cisco 10.20.1.1 port 43868 RP/0/RP0/CPU0:Sep 27 19:41:49.038 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10660]: Accepted authentication/pam for cisco from 10.20.1.1 port 47944 ssh2 RP/0/RP0/CPU0:Sep 27 19:41:52.813 UTC: config[68062]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000025' to view the changes. RP/0/RP0/CPU0:Sep 27 19:41:52.922 UTC: config[68062]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.20.1.1) RP/0/RP0/CPU0:Sep 27 19:41:54.559 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10665]: Received disconnect from 10.20.1.1 port 47944:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:41:54.560 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10665]: Disconnected from user cisco 10.20.1.1 port 47944 RP/0/RP0/CPU0:Sep 27 19:42:07.400 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 2.2.2.2:0 is DOWN (Received Notification message from peer: Hold Timer Expired) RP/0/RP0/CPU0:Sep 27 19:42:10.138 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10756]: Accepted authentication/pam for cisco from 10.20.1.1 port 48646 ssh2 RP/0/RP0/CPU0:Sep 27 19:42:13.831 UTC: ifmgr[155]: %PKT_INFRA-LINK-5-CHANGED : Interface GigabitEthernet0/0/0/0, changed state to Administratively Down RP/0/RP0/CPU0:Sep 27 19:42:13.833 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 2.2.2.2 on GigabitEthernet0/0/0/0 in area 0 from FULL to DOWN, Neighbor Down: interface down or detached, vrf default vrfid 0x60000000 RP/0/RP0/CPU0:Sep 27 19:42:14.114 UTC: config[68158]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000026' to view the changes. RP/0/RP0/CPU0:Sep 27 19:42:14.221 UTC: config[68158]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.20.1.1) RP/0/RP0/CPU0:Sep 27 19:42:15.938 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10761]: Received disconnect from 10.20.1.1 port 48646:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:42:15.938 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10761]: Disconnected from user cisco 10.20.1.1 port 48646 RP/0/RP0/CPU0:Sep 27 19:43:03.691 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10933]: Accepted authentication/pam for cisco from 10.20.1.1 port 40934 ssh2 RP/0/RP0/CPU0:Sep 27 19:43:07.118 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/0, changed state to Down RP/0/RP0/CPU0:Sep 27 19:43:07.118 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/0, changed state to Down RP/0/RP0/CPU0:Sep 27 19:43:07.134 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/0, changed state to Up RP/0/RP0/CPU0:Sep 27 19:43:07.207 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/0, changed state to Up RP/0/RP0/CPU0:Sep 27 19:43:07.469 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 2.2.2.2:0 is UP (IPv4 connection) RP/0/RP0/CPU0:Sep 27 19:43:07.505 UTC: config[68331]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000027' to view the changes. RP/0/RP0/CPU0:Sep 27 19:43:07.711 UTC: config[68331]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.20.1.1) RP/0/RP0/CPU0:Sep 27 19:43:09.353 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10938]: Received disconnect from 10.20.1.1 port 40934:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:43:09.353 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10938]: Disconnected from user cisco 10.20.1.1 port 40934 RP/0/RP0/CPU0:Sep 27 19:43:09.514 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 2.2.2.2 on GigabitEthernet0/0/0/0 in area 0 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 RP/0/RP0/CPU0:Sep 27 19:45:40.987 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[11227]: Accepted authentication/pam for cisco from 10.20.1.1 port 34502 ssh2 RP/0/RP0/CPU0:Sep 27 19:45:42.986 UTC: logger[68625]: %OS-SYSLOG-6-LOG_INFO : informational STEP12-CLEAR: clear counters interface GigabitEthernet0/0/0/0 RP/0/RP0/CPU0:Sep 27 19:45:43.176 UTC: statsd_manager_l[244]: %MGBL-IFSTATS-6-CLEAR_COUNTERS : Clear counters on GigabitEthernet0/0/0/0 RP/0/RP0/CPU0:Sep 27 19:45:43.284 UTC: logger[68631]: %OS-SYSLOG-6-LOG_INFO : informational STEP12-CLEAR: clear counters interface GigabitEthernet0/0/0/1 RP/0/RP0/CPU0:Sep 27 19:45:43.457 UTC: statsd_manager_l[244]: %MGBL-IFSTATS-6-CLEAR_COUNTERS : Clear counters on GigabitEthernet0/0/0/1 RP/0/RP0/CPU0:Sep 27 19:45:43.624 UTC: logger[68637]: %OS-SYSLOG-6-LOG_INFO : informational STEP12-CLEAR: clear counters interface GigabitEthernet0/0/0/2 RP/0/RP0/CPU0:Sep 27 19:45:43.873 UTC: statsd_manager_l[244]: %MGBL-IFSTATS-6-CLEAR_COUNTERS : Clear counters on GigabitEthernet0/0/0/2 RP/0/RP0/CPU0:Sep 27 19:45:44.023 UTC: logger[68644]: %OS-SYSLOG-6-LOG_INFO : informational STEP12-CLEAR: clear mpls forwarding counters RP/0/RP0/CPU0:Sep 27 19:45:44.747 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[11232]: Received disconnect from 10.20.1.1 port 34502:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:45:44.747 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[11232]: Disconnected from user cisco 10.20.1.1 port 34502 RP/0/RP0/CPU0:Sep 27 19:46:20.855 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[11332]: Accepted authentication/pam for cisco from 10.20.1.1 port 59784 ssh2 RP/0/RP0/CPU0:Sep 27 19:46:26.426 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[11337]: Received disconnect from 10.20.1.1 port 59784:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:46:26.426 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[11337]: Disconnected from user cisco 10.20.1.1 port 59784 RP/0/RP0/CPU0:Sep 27 19:48:17.442 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[11564]: Accepted authentication/pam for cisco from 10.20.1.1 port 49724 ssh2 RP/0/RP0/CPU0:Sep 27 19:48:37.555 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[11569]: Received disconnect from 10.20.1.1 port 49724:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:48:37.555 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[11569]: Disconnected from user cisco 10.20.1.1 port 49724 RP/0/RP0/CPU0:Sep 27 19:48:38.382 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[11902]: Accepted authentication/pam for cisco from 10.20.1.1 port 45252 ssh2