RP/0/RP0/CPU0:PE1#show logging start Sep 27 19:38:07 Sun Sep 27 19:47:26.081 UTC Time Zone UTC, DST disabled Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns) Console logging: Disabled Monitor logging: level debugging, 0 messages logged Trap logging: level informational, 0 messages logged Buffer logging: level debugging, 315 messages logged Log Buffer (2097152 bytes): RP/0/RP0/CPU0:Sep 27 19:38:07.227 UTC: logger[69112]: %OS-SYSLOG-6-LOG_INFO : informational STEP12-BEGIN RP/0/RP0/CPU0:Sep 27 19:38:07.488 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[11721]: Received disconnect from 10.20.1.1 port 37448:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:38:07.488 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[11721]: Disconnected from user cisco 10.20.1.1 port 37448 RP/0/RP0/CPU0:Sep 27 19:41:42.700 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[12079]: Accepted authentication/pam for cisco from 10.20.1.1 port 57098 ssh2 RP/0/RP0/CPU0:Sep 27 19:41:46.321 UTC: config[69481]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000025' to view the changes. RP/0/RP0/CPU0:Sep 27 19:41:46.433 UTC: config[69481]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.20.1.1) RP/0/RP0/CPU0:Sep 27 19:41:48.317 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[12084]: Received disconnect from 10.20.1.1 port 57098:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:41:48.317 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[12084]: Disconnected from user cisco 10.20.1.1 port 57098 RP/0/RP0/CPU0:Sep 27 19:42:03.386 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[12173]: Accepted authentication/pam for cisco from 10.20.1.1 port 48992 ssh2 RP/0/RP0/CPU0:Sep 27 19:42:06.985 UTC: ifmgr[155]: %PKT_INFRA-LINK-5-CHANGED : Interface GigabitEthernet0/0/0/1, changed state to Administratively Down RP/0/RP0/CPU0:Sep 27 19:42:06.986 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 3.3.3.3 on GigabitEthernet0/0/0/1 in area 0 from FULL to DOWN, Neighbor Down: interface down or detached, vrf default vrfid 0x60000000 RP/0/RP0/CPU0:Sep 27 19:42:07.064 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 3.3.3.3:0 is DOWN (Interface state down) RP/0/RP0/CPU0:Sep 27 19:42:07.379 UTC: config[69575]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000026' to view the changes. RP/0/RP0/CPU0:Sep 27 19:42:07.516 UTC: config[69575]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.20.1.1) RP/0/RP0/CPU0:Sep 27 19:42:09.291 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[12182]: Received disconnect from 10.20.1.1 port 48992:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:42:09.292 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[12182]: Disconnected from user cisco 10.20.1.1 port 48992 RP/0/RP0/CPU0:Sep 27 19:42:56.712 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[12323]: Accepted authentication/pam for cisco from 10.20.1.1 port 53128 ssh2 RP/0/RP0/CPU0:Sep 27 19:43:00.116 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/1, changed state to Down RP/0/RP0/CPU0:Sep 27 19:43:00.116 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/1, changed state to Down RP/0/RP0/CPU0:Sep 27 19:43:00.175 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/1, changed state to Up RP/0/RP0/CPU0:Sep 27 19:43:00.178 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/1, changed state to Up RP/0/RP0/CPU0:Sep 27 19:43:00.507 UTC: config[65625]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000027' to view the changes. RP/0/RP0/CPU0:Sep 27 19:43:00.629 UTC: config[65625]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.20.1.1) RP/0/RP0/CPU0:Sep 27 19:43:02.987 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[12328]: Received disconnect from 10.20.1.1 port 53128:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:43:02.988 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[12328]: Disconnected from user cisco 10.20.1.1 port 53128 RP/0/RP0/CPU0:Sep 27 19:43:07.509 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 3.3.3.3:0 is UP (IPv4 connection) RP/0/RP0/CPU0:Sep 27 19:43:09.511 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 3.3.3.3 on GigabitEthernet0/0/0/1 in area 0 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 RP/0/RP0/CPU0:Sep 27 19:43:15.073 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[12442]: Accepted authentication/pam for cisco from 10.20.1.1 port 50874 ssh2 RP/0/RP0/CPU0:Sep 27 19:43:18.561 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[12447]: Received disconnect from 10.20.1.1 port 50874:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:43:18.561 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[12447]: Disconnected from user cisco 10.20.1.1 port 50874 RP/0/RP0/CPU0:Sep 27 19:43:29.297 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[12557]: Accepted authentication/pam for cisco from 10.20.1.1 port 49122 ssh2 RP/0/RP0/CPU0:Sep 27 19:43:32.302 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[12562]: Received disconnect from 10.20.1.1 port 49122:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:43:32.302 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[12562]: Disconnected from user cisco 10.20.1.1 port 49122 RP/0/RP0/CPU0:Sep 27 19:45:36.821 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[12792]: Accepted authentication/pam for cisco from 10.20.1.1 port 53142 ssh2 RP/0/RP0/CPU0:Sep 27 19:45:38.851 UTC: logger[66094]: %OS-SYSLOG-6-LOG_INFO : informational STEP12-CLEAR: clear counters interface GigabitEthernet0/0/0/0 RP/0/RP0/CPU0:Sep 27 19:45:39.073 UTC: statsd_manager_l[244]: %MGBL-IFSTATS-6-CLEAR_COUNTERS : Clear counters on GigabitEthernet0/0/0/0 RP/0/RP0/CPU0:Sep 27 19:45:39.278 UTC: logger[66100]: %OS-SYSLOG-6-LOG_INFO : informational STEP12-CLEAR: clear counters interface GigabitEthernet0/0/0/1 RP/0/RP0/CPU0:Sep 27 19:45:39.412 UTC: statsd_manager_l[244]: %MGBL-IFSTATS-6-CLEAR_COUNTERS : Clear counters on GigabitEthernet0/0/0/1 RP/0/RP0/CPU0:Sep 27 19:45:39.502 UTC: logger[66106]: %OS-SYSLOG-6-LOG_INFO : informational STEP12-CLEAR: clear counters interface GigabitEthernet0/0/0/2 RP/0/RP0/CPU0:Sep 27 19:45:39.671 UTC: statsd_manager_l[244]: %MGBL-IFSTATS-6-CLEAR_COUNTERS : Clear counters on GigabitEthernet0/0/0/2 RP/0/RP0/CPU0:Sep 27 19:45:39.871 UTC: logger[66112]: %OS-SYSLOG-6-LOG_INFO : informational STEP12-CLEAR: clear mpls forwarding counters RP/0/RP0/CPU0:Sep 27 19:45:40.361 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[12797]: Received disconnect from 10.20.1.1 port 53142:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:45:40.361 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[12797]: Disconnected from user cisco 10.20.1.1 port 53142 RP/0/RP0/CPU0:Sep 27 19:46:14.304 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[12890]: Accepted authentication/pam for cisco from 10.20.1.1 port 43330 ssh2 RP/0/RP0/CPU0:Sep 27 19:46:20.114 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[12895]: Received disconnect from 10.20.1.1 port 43330:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:46:20.114 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[12895]: Disconnected from user cisco 10.20.1.1 port 43330 RP/0/RP0/CPU0:Sep 27 19:47:00.619 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13025]: Accepted authentication/pam for cisco from 10.20.1.1 port 51326 ssh2 RP/0/RP0/CPU0:Sep 27 19:47:23.117 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13030]: Received disconnect from 10.20.1.1 port 51326:11: disconnected by user RP/0/RP0/CPU0:Sep 27 19:47:23.117 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13030]: Disconnected from user cisco 10.20.1.1 port 51326 RP/0/RP0/CPU0:Sep 27 19:47:24.081 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13379]: Accepted authentication/pam for cisco from 10.20.1.1 port 52596 ssh2