RP/0/RP0/CPU0:P1#show logging start Sep 11 14:15:32 Fri Sep 11 14:24:43.489 UTC Time Zone UTC, DST disabled Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns) Console logging: Disabled Monitor logging: level debugging, 0 messages logged Trap logging: level informational, 0 messages logged Buffer logging: level debugging, 231 messages logged Log Buffer (2097152 bytes): RP/0/RP0/CPU0:Sep 11 14:15:32.247 UTC: logger[66011]: %OS-SYSLOG-6-LOG_INFO : informational STEP4-BEGIN RP/0/RP0/CPU0:Sep 11 14:15:32.631 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[12712]: Received disconnect from 10.100.3.1 port 62670:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:15:32.631 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[12712]: Disconnected from user cisco 10.100.3.1 port 62670 RP/0/RP0/CPU0:Sep 11 14:17:20.038 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 5.5.5.5:0 is DOWN (Received Notification message from peer: Hold Timer Expired) RP/0/RP0/CPU0:Sep 11 14:17:23.549 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 5.5.5.5:0 is UP (IPv4 connection) RP/0/RP0/CPU0:Sep 11 14:17:26.273 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 4.4.4.4:0 is DOWN (Received Notification message from peer: Hold Timer Expired) RP/0/RP0/CPU0:Sep 11 14:17:28.616 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 4.4.4.4:0 is UP (IPv4 connection) RP/0/RP0/CPU0:Sep 11 14:17:32.578 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 2.2.2.2:0 is DOWN (Received Notification message from peer: Hold Timer Expired) RP/0/RP0/CPU0:Sep 11 14:17:34.773 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 2.2.2.2:0 is UP (IPv4 connection) RP/0/RP0/CPU0:Sep 11 14:21:25.930 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13244]: Accepted authentication/pam for cisco from 10.100.3.1 port 62801 ssh2 RP/0/RP0/CPU0:Sep 11 14:21:28.831 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13249]: Received disconnect from 10.100.3.1 port 62801:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:21:28.831 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13249]: Disconnected from user cisco 10.100.3.1 port 62801 RP/0/RP0/CPU0:Sep 11 14:22:05.893 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13339]: Accepted authentication/pam for cisco from 10.100.3.1 port 62822 ssh2 RP/0/RP0/CPU0:Sep 11 14:22:09.498 UTC: config[66641]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000004' to view the changes. RP/0/RP0/CPU0:Sep 11 14:22:09.592 UTC: config[66641]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.100.3.1) RP/0/RP0/CPU0:Sep 11 14:22:10.062 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13344]: Received disconnect from 10.100.3.1 port 62822:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:22:10.062 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13344]: Disconnected from user cisco 10.100.3.1 port 62822 RP/0/RP0/CPU0:Sep 11 14:22:29.587 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 2.2.2.2:0 is DOWN (Received Notification message from peer: Hold Timer Expired) RP/0/RP0/CPU0:Sep 11 14:22:30.498 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13460]: Accepted authentication/pam for cisco from 10.100.3.1 port 62829 ssh2 RP/0/RP0/CPU0:Sep 11 14:22:33.660 UTC: ifmgr[155]: %PKT_INFRA-LINK-5-CHANGED : Interface GigabitEthernet0/0/0/0, changed state to Administratively Down RP/0/RP0/CPU0:Sep 11 14:22:33.662 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 2.2.2.2 on GigabitEthernet0/0/0/0 in area 0 from FULL to DOWN, Neighbor Down: interface down or detached, vrf default vrfid 0x60000000 RP/0/RP0/CPU0:Sep 11 14:22:33.889 UTC: config[66762]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000005' to view the changes. RP/0/RP0/CPU0:Sep 11 14:22:34.004 UTC: config[66762]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.100.3.1) RP/0/RP0/CPU0:Sep 11 14:22:34.483 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13465]: Received disconnect from 10.100.3.1 port 62829:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:22:34.483 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13465]: Disconnected from user cisco 10.100.3.1 port 62829 RP/0/RP0/CPU0:Sep 11 14:23:15.187 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13594]: Accepted authentication/pam for cisco from 10.100.3.1 port 62836 ssh2 RP/0/RP0/CPU0:Sep 11 14:23:18.641 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/0, changed state to Down RP/0/RP0/CPU0:Sep 11 14:23:18.641 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/0, changed state to Down RP/0/RP0/CPU0:Sep 11 14:23:18.656 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/0, changed state to Up RP/0/RP0/CPU0:Sep 11 14:23:18.659 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/0, changed state to Up RP/0/RP0/CPU0:Sep 11 14:23:18.930 UTC: config[66896]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000006' to view the changes. RP/0/RP0/CPU0:Sep 11 14:23:19.064 UTC: config[66896]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.100.3.1) RP/0/RP0/CPU0:Sep 11 14:23:19.640 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13599]: Received disconnect from 10.100.3.1 port 62836:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:23:19.640 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13599]: Disconnected from user cisco 10.100.3.1 port 62836 RP/0/RP0/CPU0:Sep 11 14:23:23.591 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 2.2.2.2:0 is UP (IPv4 connection) RP/0/RP0/CPU0:Sep 11 14:23:28.019 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 2.2.2.2 on GigabitEthernet0/0/0/0 in area 0 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 RP/0/RP0/CPU0:Sep 11 14:24:29.841 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13750]: Accepted authentication/pam for cisco from 10.100.3.1 port 62874 ssh2 RP/0/RP0/CPU0:Sep 11 14:24:41.192 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13755]: Received disconnect from 10.100.3.1 port 62874:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:24:41.192 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13755]: Disconnected from user cisco 10.100.3.1 port 62874 RP/0/RP0/CPU0:Sep 11 14:24:41.925 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13954]: Accepted authentication/pam for cisco from 10.100.3.1 port 62883 ssh2