RP/0/RP0/CPU0:PE1#show logging start Sep 11 14:19:44 Fri Sep 11 14:26:40.996 UTC Time Zone UTC, DST disabled Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns) Console logging: Disabled Monitor logging: level debugging, 0 messages logged Trap logging: level informational, 0 messages logged Buffer logging: level debugging, 273 messages logged Log Buffer (2097152 bytes): RP/0/RP0/CPU0:Sep 11 14:19:44.121 UTC: logger[66825]: %OS-SYSLOG-6-LOG_INFO : informational STEP4-BEGIN RP/0/RP0/CPU0:Sep 11 14:19:44.391 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13531]: Received disconnect from 10.100.3.1 port 62770:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:19:44.391 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13531]: Disconnected from user cisco 10.100.3.1 port 62770 RP/0/RP0/CPU0:Sep 11 14:21:22.168 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13730]: Accepted authentication/pam for cisco from 10.100.3.1 port 62800 ssh2 RP/0/RP0/CPU0:Sep 11 14:21:25.220 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13735]: Received disconnect from 10.100.3.1 port 62800:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:21:25.220 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13735]: Disconnected from user cisco 10.100.3.1 port 62800 RP/0/RP0/CPU0:Sep 11 14:22:01.378 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13854]: Accepted authentication/pam for cisco from 10.100.3.1 port 62820 ssh2 RP/0/RP0/CPU0:Sep 11 14:22:04.835 UTC: config[67167]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000004' to view the changes. RP/0/RP0/CPU0:Sep 11 14:22:04.968 UTC: config[67167]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.100.3.1) RP/0/RP0/CPU0:Sep 11 14:22:05.316 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13859]: Received disconnect from 10.100.3.1 port 62820:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:22:05.316 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13859]: Disconnected from user cisco 10.100.3.1 port 62820 RP/0/RP0/CPU0:Sep 11 14:22:25.775 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13970]: Accepted authentication/pam for cisco from 10.100.3.1 port 62828 ssh2 RP/0/RP0/CPU0:Sep 11 14:22:29.023 UTC: ifmgr[155]: %PKT_INFRA-LINK-5-CHANGED : Interface GigabitEthernet0/0/0/1, changed state to Administratively Down RP/0/RP0/CPU0:Sep 11 14:22:29.026 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 3.3.3.3 on GigabitEthernet0/0/0/1 in area 0 from FULL to DOWN, Neighbor Down: interface down or detached, vrf default vrfid 0x60000000 RP/0/RP0/CPU0:Sep 11 14:22:29.086 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 3.3.3.3:0 is DOWN (Interface state down) RP/0/RP0/CPU0:Sep 11 14:22:29.307 UTC: config[67272]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000005' to view the changes. RP/0/RP0/CPU0:Sep 11 14:22:29.403 UTC: config[67272]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.100.3.1) RP/0/RP0/CPU0:Sep 11 14:22:29.885 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13975]: Received disconnect from 10.100.3.1 port 62828:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:22:29.885 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13975]: Disconnected from user cisco 10.100.3.1 port 62828 RP/0/RP0/CPU0:Sep 11 14:23:20.229 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14130]: Accepted authentication/pam for cisco from 10.100.3.1 port 62841 ssh2 RP/0/RP0/CPU0:Sep 11 14:23:23.302 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/1, changed state to Down RP/0/RP0/CPU0:Sep 11 14:23:23.302 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/1, changed state to Down RP/0/RP0/CPU0:Sep 11 14:23:23.318 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/1, changed state to Up RP/0/RP0/CPU0:Sep 11 14:23:23.320 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/1, changed state to Up RP/0/RP0/CPU0:Sep 11 14:23:23.596 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 3.3.3.3:0 is UP (IPv4 connection) RP/0/RP0/CPU0:Sep 11 14:23:23.694 UTC: config[67432]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000006' to view the changes. RP/0/RP0/CPU0:Sep 11 14:23:23.785 UTC: config[67432]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.100.3.1) RP/0/RP0/CPU0:Sep 11 14:23:24.113 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14135]: Received disconnect from 10.100.3.1 port 62841:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:23:24.113 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14135]: Disconnected from user cisco 10.100.3.1 port 62841 RP/0/RP0/CPU0:Sep 11 14:23:28.016 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 3.3.3.3 on GigabitEthernet0/0/0/1 in area 0 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 RP/0/RP0/CPU0:Sep 11 14:23:36.384 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14203]: Accepted authentication/pam for cisco from 10.100.3.1 port 62844 ssh2 RP/0/RP0/CPU0:Sep 11 14:23:38.495 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14208]: Received disconnect from 10.100.3.1 port 62844:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:23:38.495 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14208]: Disconnected from user cisco 10.100.3.1 port 62844 RP/0/RP0/CPU0:Sep 11 14:23:56.025 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14267]: Accepted authentication/pam for cisco from 10.100.3.1 port 62872 ssh2 RP/0/RP0/CPU0:Sep 11 14:23:58.021 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14272]: Received disconnect from 10.100.3.1 port 62872:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:23:58.021 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14272]: Disconnected from user cisco 10.100.3.1 port 62872 RP/0/RP0/CPU0:Sep 11 14:23:58.731 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14323]: Accepted authentication/pam for cisco from 10.100.3.1 port 62873 ssh2 RP/0/RP0/CPU0:Sep 11 14:24:01.006 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14328]: Received disconnect from 10.100.3.1 port 62873:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:24:01.006 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14328]: Disconnected from user cisco 10.100.3.1 port 62873 RP/0/RP0/CPU0:Sep 11 14:26:24.338 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14593]: Accepted authentication/pam for cisco from 10.100.3.1 port 62935 ssh2 RP/0/RP0/CPU0:Sep 11 14:26:38.489 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14598]: Received disconnect from 10.100.3.1 port 62935:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:26:38.489 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14598]: Disconnected from user cisco 10.100.3.1 port 62935 RP/0/RP0/CPU0:Sep 11 14:26:39.306 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14845]: Accepted authentication/pam for cisco from 10.100.3.1 port 62937 ssh2