RP/0/RP0/CPU0:P1#show logging start Sep 11 14:24:57 Fri Sep 11 14:32:07.186 UTC Time Zone UTC, DST disabled Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns) Console logging: Disabled Monitor logging: level debugging, 0 messages logged Trap logging: level informational, 0 messages logged Buffer logging: level debugging, 282 messages logged Log Buffer (2097152 bytes): RP/0/RP0/CPU0:Sep 11 14:24:57.588 UTC: logger[67454]: %OS-SYSLOG-6-LOG_INFO : informational STEP5-BEGIN RP/0/RP0/CPU0:Sep 11 14:24:57.881 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14159]: Received disconnect from 10.100.3.1 port 62889:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:24:57.881 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14159]: Disconnected from user cisco 10.100.3.1 port 62889 RP/0/RP0/CPU0:Sep 11 14:27:56.942 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 2.2.2.2:0 is DOWN (Discovery Hello Hold Timer expired) RP/0/RP0/CPU0:Sep 11 14:27:58.737 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 4.4.4.4:0 is DOWN (Discovery Hello Hold Timer expired) RP/0/RP0/CPU0:Sep 11 14:28:21.242 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 5.5.5.5:0 is DOWN (Received Notification message from peer: Hold Timer Expired) RP/0/RP0/CPU0:Sep 11 14:28:27.533 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 5.5.5.5 on GigabitEthernet0/0/0/1 in area 0 from FULL to DOWN, Neighbor Down: dead timer expired, vrf default vrfid 0x60000000 RP/0/RP0/CPU0:Sep 11 14:28:34.844 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 5.5.5.5 on GigabitEthernet0/0/0/1 in area 0 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 RP/0/RP0/CPU0:Sep 11 14:28:35.632 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 5.5.5.5:0 is UP (IPv4 connection) RP/0/RP0/CPU0:Sep 11 14:28:37.817 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 2.2.2.2:0 is UP (IPv4 connection) RP/0/RP0/CPU0:Sep 11 14:28:38.841 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 4.4.4.4:0 is UP (IPv4 connection) RP/0/RP0/CPU0:Sep 11 14:29:20.915 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14580]: Accepted authentication/pam for cisco from 10.100.3.1 port 62979 ssh2 RP/0/RP0/CPU0:Sep 11 14:29:23.773 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14585]: Received disconnect from 10.100.3.1 port 62979:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:29:23.773 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14585]: Disconnected from user cisco 10.100.3.1 port 62979 RP/0/RP0/CPU0:Sep 11 14:29:57.233 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14674]: Accepted authentication/pam for cisco from 10.100.3.1 port 63017 ssh2 RP/0/RP0/CPU0:Sep 11 14:30:00.397 UTC: config[67976]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000007' to view the changes. RP/0/RP0/CPU0:Sep 11 14:30:00.561 UTC: config[67976]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.100.3.1) RP/0/RP0/CPU0:Sep 11 14:30:01.260 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14679]: Received disconnect from 10.100.3.1 port 63017:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:30:01.261 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14679]: Disconnected from user cisco 10.100.3.1 port 63017 RP/0/RP0/CPU0:Sep 11 14:30:25.791 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 2.2.2.2:0 is DOWN (Received Notification message from peer: Hold Timer Expired) RP/0/RP0/CPU0:Sep 11 14:30:26.842 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14822]: Accepted authentication/pam for cisco from 10.100.3.1 port 63027 ssh2 RP/0/RP0/CPU0:Sep 11 14:30:29.651 UTC: ifmgr[155]: %PKT_INFRA-LINK-5-CHANGED : Interface GigabitEthernet0/0/0/0, changed state to Administratively Down RP/0/RP0/CPU0:Sep 11 14:30:29.652 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 2.2.2.2 on GigabitEthernet0/0/0/0 in area 0 from FULL to DOWN, Neighbor Down: interface down or detached, vrf default vrfid 0x60000000 RP/0/RP0/CPU0:Sep 11 14:30:29.845 UTC: config[68124]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000008' to view the changes. RP/0/RP0/CPU0:Sep 11 14:30:29.969 UTC: config[68124]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.100.3.1) RP/0/RP0/CPU0:Sep 11 14:30:30.545 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14827]: Received disconnect from 10.100.3.1 port 63027:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:30:30.545 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14827]: Disconnected from user cisco 10.100.3.1 port 63027 RP/0/RP0/CPU0:Sep 11 14:31:11.349 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14912]: Accepted authentication/pam for cisco from 10.100.3.1 port 63034 ssh2 RP/0/RP0/CPU0:Sep 11 14:31:14.755 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/0, changed state to Down RP/0/RP0/CPU0:Sep 11 14:31:14.755 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/0, changed state to Down RP/0/RP0/CPU0:Sep 11 14:31:14.771 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/0, changed state to Up RP/0/RP0/CPU0:Sep 11 14:31:14.829 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/0, changed state to Up RP/0/RP0/CPU0:Sep 11 14:31:15.071 UTC: config[68225]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000009' to view the changes. RP/0/RP0/CPU0:Sep 11 14:31:15.208 UTC: config[68225]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.100.3.1) RP/0/RP0/CPU0:Sep 11 14:31:15.564 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14928]: Received disconnect from 10.100.3.1 port 63034:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:31:15.564 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14928]: Disconnected from user cisco 10.100.3.1 port 63034 RP/0/RP0/CPU0:Sep 11 14:31:21.210 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 2.2.2.2:0 is UP (IPv4 connection) RP/0/RP0/CPU0:Sep 11 14:31:24.690 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 2.2.2.2 on GigabitEthernet0/0/0/0 in area 0 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 RP/0/RP0/CPU0:Sep 11 14:31:54.077 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[15042]: Accepted authentication/pam for cisco from 10.100.3.1 port 63038 ssh2 RP/0/RP0/CPU0:Sep 11 14:32:04.645 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[15047]: Received disconnect from 10.100.3.1 port 63038:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:32:04.645 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[15047]: Disconnected from user cisco 10.100.3.1 port 63038 RP/0/RP0/CPU0:Sep 11 14:32:05.286 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[15242]: Accepted authentication/pam for cisco from 10.100.3.1 port 63042 ssh2