RP/0/RP0/CPU0:PE1#show logging start Sep 11 14:26:55 Fri Sep 11 14:34:13.355 UTC Time Zone UTC, DST disabled Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns) Console logging: Disabled Monitor logging: level debugging, 0 messages logged Trap logging: level informational, 0 messages logged Buffer logging: level debugging, 324 messages logged Log Buffer (2097152 bytes): RP/0/RP0/CPU0:Sep 11 14:26:55.605 UTC: logger[68353]: %OS-SYSLOG-6-LOG_INFO : informational STEP5-BEGIN RP/0/RP0/CPU0:Sep 11 14:26:55.840 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[15059]: Received disconnect from 10.100.3.1 port 62940:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:26:55.840 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[15059]: Disconnected from user cisco 10.100.3.1 port 62940 RP/0/RP0/CPU0:Sep 11 14:27:58.287 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 4.4.4.4:0 is DOWN (Discovery Hello Hold Timer expired) RP/0/RP0/CPU0:Sep 11 14:28:13.198 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 3.3.3.3:0 is DOWN (Discovery Hello Hold Timer expired) RP/0/RP0/CPU0:Sep 11 14:28:37.559 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 4.4.4.4:0 is UP (IPv4 connection) RP/0/RP0/CPU0:Sep 11 14:28:37.821 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 3.3.3.3:0 is UP (IPv4 connection) RP/0/RP0/CPU0:Sep 11 14:28:39.391 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 4.4.4.4 on GigabitEthernet0/0/0/2 in area 0 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 RP/0/RP0/CPU0:Sep 11 14:29:17.303 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[15320]: Accepted authentication/pam for cisco from 10.100.3.1 port 62970 ssh2 RP/0/RP0/CPU0:Sep 11 14:29:20.284 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[15325]: Received disconnect from 10.100.3.1 port 62970:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:29:20.284 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[15325]: Disconnected from user cisco 10.100.3.1 port 62970 RP/0/RP0/CPU0:Sep 11 14:29:52.697 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[15411]: Accepted authentication/pam for cisco from 10.100.3.1 port 63016 ssh2 RP/0/RP0/CPU0:Sep 11 14:29:56.026 UTC: config[68713]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000007' to view the changes. RP/0/RP0/CPU0:Sep 11 14:29:56.118 UTC: config[68713]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.100.3.1) RP/0/RP0/CPU0:Sep 11 14:29:56.501 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[15416]: Received disconnect from 10.100.3.1 port 63016:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:29:56.501 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[15416]: Disconnected from user cisco 10.100.3.1 port 63016 RP/0/RP0/CPU0:Sep 11 14:30:21.983 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[15558]: Accepted authentication/pam for cisco from 10.100.3.1 port 63026 ssh2 RP/0/RP0/CPU0:Sep 11 14:30:25.400 UTC: ifmgr[155]: %PKT_INFRA-LINK-5-CHANGED : Interface GigabitEthernet0/0/0/1, changed state to Administratively Down RP/0/RP0/CPU0:Sep 11 14:30:25.403 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 3.3.3.3 on GigabitEthernet0/0/0/1 in area 0 from FULL to DOWN, Neighbor Down: interface down or detached, vrf default vrfid 0x60000000 RP/0/RP0/CPU0:Sep 11 14:30:25.408 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 3.3.3.3:0 is DOWN (Interface state down) RP/0/RP0/CPU0:Sep 11 14:30:25.610 UTC: config[68860]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000008' to view the changes. RP/0/RP0/CPU0:Sep 11 14:30:25.783 UTC: config[68860]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.100.3.1) RP/0/RP0/CPU0:Sep 11 14:30:26.116 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[15563]: Received disconnect from 10.100.3.1 port 63026:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:30:26.116 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[15563]: Disconnected from user cisco 10.100.3.1 port 63026 RP/0/RP0/CPU0:Sep 11 14:31:16.245 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[15691]: Accepted authentication/pam for cisco from 10.100.3.1 port 63035 ssh2 RP/0/RP0/CPU0:Sep 11 14:31:19.099 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/1, changed state to Down RP/0/RP0/CPU0:Sep 11 14:31:19.099 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/1, changed state to Down RP/0/RP0/CPU0:Sep 11 14:31:19.114 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/1, changed state to Up RP/0/RP0/CPU0:Sep 11 14:31:19.117 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/1, changed state to Up RP/0/RP0/CPU0:Sep 11 14:31:19.421 UTC: config[68997]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000009' to view the changes. RP/0/RP0/CPU0:Sep 11 14:31:19.585 UTC: config[68997]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.100.3.1) RP/0/RP0/CPU0:Sep 11 14:31:19.986 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[15700]: Received disconnect from 10.100.3.1 port 63035:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:31:19.986 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[15700]: Disconnected from user cisco 10.100.3.1 port 63035 RP/0/RP0/CPU0:Sep 11 14:31:21.214 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 3.3.3.3:0 is UP (IPv4 connection) RP/0/RP0/CPU0:Sep 11 14:31:24.688 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 3.3.3.3 on GigabitEthernet0/0/0/1 in area 0 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 RP/0/RP0/CPU0:Sep 11 14:31:32.805 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[15768]: Accepted authentication/pam for cisco from 10.100.3.1 port 63036 ssh2 RP/0/RP0/CPU0:Sep 11 14:31:34.907 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[15773]: Received disconnect from 10.100.3.1 port 63036:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:31:34.908 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[15773]: Disconnected from user cisco 10.100.3.1 port 63036 RP/0/RP0/CPU0:Sep 11 14:33:55.026 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[15995]: Accepted authentication/pam for cisco from 10.100.3.1 port 63095 ssh2 RP/0/RP0/CPU0:Sep 11 14:34:10.635 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[16000]: Received disconnect from 10.100.3.1 port 63095:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:34:10.635 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[16000]: Disconnected from user cisco 10.100.3.1 port 63095 RP/0/RP0/CPU0:Sep 11 14:34:11.486 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[16269]: Accepted authentication/pam for cisco from 10.100.3.1 port 63098 ssh2