RP/0/RP0/CPU0:P1#show logging start Sep 11 14:32:22 Fri Sep 11 14:39:28.840 UTC Time Zone UTC, DST disabled Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns) Console logging: Disabled Monitor logging: level debugging, 0 messages logged Trap logging: level informational, 0 messages logged Buffer logging: level debugging, 325 messages logged Log Buffer (2097152 bytes): RP/0/RP0/CPU0:Sep 11 14:32:22.376 UTC: logger[68788]: %OS-SYSLOG-6-LOG_INFO : informational STEP6-BEGIN RP/0/RP0/CPU0:Sep 11 14:32:22.653 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[15475]: Received disconnect from 10.100.3.1 port 63052:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:32:22.653 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[15475]: Disconnected from user cisco 10.100.3.1 port 63052 RP/0/RP0/CPU0:Sep 11 14:35:55.436 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[15810]: Accepted authentication/pam for cisco from 10.100.3.1 port 63123 ssh2 RP/0/RP0/CPU0:Sep 11 14:35:58.544 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[15815]: Received disconnect from 10.100.3.1 port 63123:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:35:58.544 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[15815]: Disconnected from user cisco 10.100.3.1 port 63123 RP/0/RP0/CPU0:Sep 11 14:36:29.043 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[15945]: Accepted authentication/pam for cisco from 10.100.3.1 port 63131 ssh2 RP/0/RP0/CPU0:Sep 11 14:36:32.566 UTC: config[69251]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000010' to view the changes. RP/0/RP0/CPU0:Sep 11 14:36:32.681 UTC: config[69251]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.100.3.1) RP/0/RP0/CPU0:Sep 11 14:36:33.049 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[15950]: Received disconnect from 10.100.3.1 port 63131:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:36:33.049 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[15950]: Disconnected from user cisco 10.100.3.1 port 63131 RP/0/RP0/CPU0:Sep 11 14:37:24.278 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[16082]: Accepted authentication/pam for cisco from 10.100.3.1 port 63137 ssh2 RP/0/RP0/CPU0:Sep 11 14:37:27.746 UTC: ifmgr[155]: %PKT_INFRA-LINK-5-CHANGED : Interface GigabitEthernet0/0/0/0, changed state to Administratively Down RP/0/RP0/CPU0:Sep 11 14:37:27.748 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 2.2.2.2 on GigabitEthernet0/0/0/0 in area 0 from FULL to DOWN, Neighbor Down: interface down or detached, vrf default vrfid 0x60000000 RP/0/RP0/CPU0:Sep 11 14:37:27.750 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-SESSION_PROTECTION : VRF 'default' (0x60000000), Session hold up initiated for peer 2.2.2.2:0 RP/0/RP0/CPU0:Sep 11 14:37:27.993 UTC: config[69384]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000011' to view the changes. RP/0/RP0/CPU0:Sep 11 14:37:28.162 UTC: config[69384]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.100.3.1) RP/0/RP0/CPU0:Sep 11 14:37:28.639 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[16087]: Received disconnect from 10.100.3.1 port 63137:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:37:28.639 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[16087]: Disconnected from user cisco 10.100.3.1 port 63137 RP/0/RP0/CPU0:Sep 11 14:38:12.245 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[16196]: Accepted authentication/pam for cisco from 10.100.3.1 port 63139 ssh2 RP/0/RP0/CPU0:Sep 11 14:38:15.744 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/0, changed state to Down RP/0/RP0/CPU0:Sep 11 14:38:15.744 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/0, changed state to Down RP/0/RP0/CPU0:Sep 11 14:38:15.759 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/0, changed state to Up RP/0/RP0/CPU0:Sep 11 14:38:15.762 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/0, changed state to Up RP/0/RP0/CPU0:Sep 11 14:38:16.048 UTC: config[69509]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000012' to view the changes. RP/0/RP0/CPU0:Sep 11 14:38:16.236 UTC: config[69509]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.100.3.1) RP/0/RP0/CPU0:Sep 11 14:38:16.746 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[16201]: Received disconnect from 10.100.3.1 port 63139:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:38:16.746 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[16201]: Disconnected from user cisco 10.100.3.1 port 63139 RP/0/RP0/CPU0:Sep 11 14:38:21.009 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-SESSION_PROTECTION : VRF 'default' (0x60000000), Session recovery succeeded for peer 2.2.2.2:0 RP/0/RP0/CPU0:Sep 11 14:38:25.257 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 2.2.2.2 on GigabitEthernet0/0/0/0 in area 0 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 RP/0/RP0/CPU0:Sep 11 14:39:14.395 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[16340]: Accepted authentication/pam for cisco from 10.100.3.1 port 63148 ssh2 RP/0/RP0/CPU0:Sep 11 14:39:26.249 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[16345]: Received disconnect from 10.100.3.1 port 63148:11: disconnected by user RP/0/RP0/CPU0:Sep 11 14:39:26.249 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[16345]: Disconnected from user cisco 10.100.3.1 port 63148 RP/0/RP0/CPU0:Sep 11 14:39:26.953 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[16569]: Accepted authentication/pam for cisco from 10.100.3.1 port 63149 ssh2