RP/0/RP0/CPU0:P2#show logging start Sep 15 04:43:11
Tue Sep 15 04:51:26.429 UTC
Time Zone UTC, DST disabled
Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns)
    Console logging: Disabled
    Monitor logging: level debugging, 0 messages logged
    Trap logging: level informational, 0 messages logged
    Buffer logging: level debugging, 503 messages logged

Log Buffer (2097152 bytes):

RP/0/RP0/CPU0:Sep 15 04:43:11.116 UTC: logger[69439]: %OS-SYSLOG-6-LOG_INFO : informational STEP7-BEGIN 
RP/0/RP0/CPU0:Sep 15 04:43:11.473 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[24318]: Received disconnect from 10.100.3.1 port 51831:11: disconnected by user 
RP/0/RP0/CPU0:Sep 15 04:43:11.473 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[24318]: Disconnected from user cisco 10.100.3.1 port 51831 
RP/0/RP0/CPU0:Sep 15 04:47:01.968 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[24680]: Accepted authentication/pam for cisco from 10.100.3.1 port 51979 ssh2 
RP/0/RP0/CPU0:Sep 15 04:47:05.156 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[24685]: Received disconnect from 10.100.3.1 port 51979:11: disconnected by user 
RP/0/RP0/CPU0:Sep 15 04:47:05.156 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[24685]: Disconnected from user cisco 10.100.3.1 port 51979 
RP/0/RP0/CPU0:Sep 15 04:48:58.865 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[24901]: Accepted authentication/pam for cisco from 10.100.3.1 port 52067 ssh2 
RP/0/RP0/CPU0:Sep 15 04:49:02.152 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/2, changed state to Down 
RP/0/RP0/CPU0:Sep 15 04:49:02.152 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/2, changed state to Down 
RP/0/RP0/CPU0:Sep 15 04:49:02.152 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/0, changed state to Down 
RP/0/RP0/CPU0:Sep 15 04:49:02.152 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/0, changed state to Down 
RP/0/RP0/CPU0:Sep 15 04:49:02.169 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/2, changed state to Up 
RP/0/RP0/CPU0:Sep 15 04:49:02.172 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/0, changed state to Up 
RP/0/RP0/CPU0:Sep 15 04:49:02.174 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/2, changed state to Up 
RP/0/RP0/CPU0:Sep 15 04:49:02.248 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/0, changed state to Up 
RP/0/RP0/CPU0:Sep 15 04:49:02.567 UTC: config[65919]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000015' to view the changes. 
RP/0/RP0/CPU0:Sep 15 04:49:02.762 UTC: config[65919]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.100.3.1) 
RP/0/RP0/CPU0:Sep 15 04:49:04.370 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[24910]: Received disconnect from 10.100.3.1 port 52067:11: disconnected by user 
RP/0/RP0/CPU0:Sep 15 04:49:04.370 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[24910]: Disconnected from user cisco 10.100.3.1 port 52067 
RP/0/RP0/CPU0:Sep 15 04:49:11.076 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 5.5.5.5 on GigabitEthernet0/0/0/2 in area 0 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 
RP/0/RP0/CPU0:Sep 15 04:49:11.658 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 1.1.1.1 on GigabitEthernet0/0/0/0 in area 0 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 
RP/0/RP0/CPU0:Sep 15 04:49:11.849 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[25005]: Accepted authentication/pam for cisco from 10.100.3.1 port 52090 ssh2 
RP/0/RP0/CPU0:Sep 15 04:49:16.188 UTC: config[66037]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000016' to view the changes. 
RP/0/RP0/CPU0:Sep 15 04:49:16.361 UTC: config[66037]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.100.3.1) 
RP/0/RP0/CPU0:Sep 15 04:49:18.169 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[25010]: Received disconnect from 10.100.3.1 port 52090:11: disconnected by user 
RP/0/RP0/CPU0:Sep 15 04:49:18.169 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[25010]: Disconnected from user cisco 10.100.3.1 port 52090 
RP/0/RP0/CPU0:Sep 15 04:51:13.851 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[25264]: Accepted authentication/pam for cisco from 10.100.3.1 port 52168 ssh2 
RP/0/RP0/CPU0:Sep 15 04:51:23.968 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[25269]: Received disconnect from 10.100.3.1 port 52168:11: disconnected by user 
RP/0/RP0/CPU0:Sep 15 04:51:23.968 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[25269]: Disconnected from user cisco 10.100.3.1 port 52168 
RP/0/RP0/CPU0:Sep 15 04:51:24.763 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[25453]: Accepted authentication/pam for cisco from 10.100.3.1 port 52176 ssh2