RP/0/RP0/CPU0:P3#show logging start Sep 13 12:46:06
Sun Sep 13 12:56:33.773 UTC
Time Zone UTC, DST disabled
Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns)
    Console logging: Disabled
    Monitor logging: level debugging, 0 messages logged
    Trap logging: level informational, 0 messages logged
    Buffer logging: level debugging, 168 messages logged

Log Buffer (2097152 bytes):

RP/0/RP0/CPU0:Sep 13 12:46:06.423 UTC: logger[66978]: %OS-SYSLOG-6-LOG_INFO : informational STEP4-BEGIN 
RP/0/RP0/CPU0:Sep 13 12:46:06.706 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9588]: Received disconnect from 10.100.3.1 port 49897:11: disconnected by user 
RP/0/RP0/CPU0:Sep 13 12:46:06.706 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9588]: Disconnected from user cisco 10.100.3.1 port 49897 
RP/0/RP0/CPU0:Sep 13 12:50:43.302 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10030]: Accepted authentication/pam for cisco from 10.100.3.1 port 49960 ssh2 
RP/0/RP0/CPU0:Sep 13 12:50:46.001 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10035]: Received disconnect from 10.100.3.1 port 49960:11: disconnected by user 
RP/0/RP0/CPU0:Sep 13 12:50:46.001 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10035]: Disconnected from user cisco 10.100.3.1 port 49960 
RP/0/RP0/CPU0:Sep 13 12:51:30.885 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10130]: Accepted authentication/pam for cisco from 10.100.3.1 port 49972 ssh2 
RP/0/RP0/CPU0:Sep 13 12:51:34.983 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/1, changed state to Down 
RP/0/RP0/CPU0:Sep 13 12:51:34.983 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/1, changed state to Down 
RP/0/RP0/CPU0:Sep 13 12:51:35.082 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/1, changed state to Up 
RP/0/RP0/CPU0:Sep 13 12:51:35.086 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/1, changed state to Up 
RP/0/RP0/CPU0:Sep 13 12:51:35.585 UTC: config[67543]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000002' to view the changes. 
RP/0/RP0/CPU0:Sep 13 12:51:35.754 UTC: config[67543]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.100.3.1) 
RP/0/RP0/CPU0:Sep 13 12:51:37.626 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10135]: Received disconnect from 10.100.3.1 port 49972:11: disconnected by user 
RP/0/RP0/CPU0:Sep 13 12:51:37.626 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10135]: Disconnected from user cisco 10.100.3.1 port 49972 
RP/0/RP0/CPU0:Sep 13 12:51:42.363 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 6.6.6.6:0 is UP (IPv4 connection) 
RP/0/RP0/CPU0:Sep 13 12:51:44.404 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 6.6.6.6 on GigabitEthernet0/0/0/1 in area 0 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 
RP/0/RP0/CPU0:Sep 13 12:56:21.250 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10583]: Accepted authentication/pam for cisco from 10.100.3.1 port 50005 ssh2 
RP/0/RP0/CPU0:Sep 13 12:56:31.072 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10588]: Received disconnect from 10.100.3.1 port 50005:11: disconnected by user 
RP/0/RP0/CPU0:Sep 13 12:56:31.072 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10588]: Disconnected from user cisco 10.100.3.1 port 50005 
RP/0/RP0/CPU0:Sep 13 12:56:31.927 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[10764]: Accepted authentication/pam for cisco from 10.100.3.1 port 50007 ssh2