RP/0/RP0/CPU0:P3#show logging start Sep 13 13:14:30
Sun Sep 13 13:25:25.684 UTC
Time Zone UTC, DST disabled
Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns)
    Console logging: Disabled
    Monitor logging: level debugging, 0 messages logged
    Trap logging: level informational, 0 messages logged
    Buffer logging: level debugging, 250 messages logged

Log Buffer (2097152 bytes):

RP/0/RP0/CPU0:Sep 13 13:14:30.403 UTC: logger[66806]: %OS-SYSLOG-6-LOG_INFO : informational STEP7-BEGIN 
RP/0/RP0/CPU0:Sep 13 13:14:30.790 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13512]: Received disconnect from 10.100.3.1 port 50328:11: disconnected by user 
RP/0/RP0/CPU0:Sep 13 13:14:30.790 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13512]: Disconnected from user cisco 10.100.3.1 port 50328 
RP/0/RP0/CPU0:Sep 13 13:19:02.724 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13958]: Accepted authentication/pam for cisco from 10.100.3.1 port 50442 ssh2 
RP/0/RP0/CPU0:Sep 13 13:19:05.424 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13963]: Received disconnect from 10.100.3.1 port 50442:11: disconnected by user 
RP/0/RP0/CPU0:Sep 13 13:19:05.424 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13963]: Disconnected from user cisco 10.100.3.1 port 50442 
RP/0/RP0/CPU0:Sep 13 13:19:46.980 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14085]: Accepted authentication/pam for cisco from 10.100.3.1 port 50457 ssh2 
RP/0/RP0/CPU0:Sep 13 13:19:50.281 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/1, changed state to Down 
RP/0/RP0/CPU0:Sep 13 13:19:50.281 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/1, changed state to Down 
RP/0/RP0/CPU0:Sep 13 13:19:50.298 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/1, changed state to Up 
RP/0/RP0/CPU0:Sep 13 13:19:50.301 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/1, changed state to Up 
RP/0/RP0/CPU0:Sep 13 13:19:50.602 UTC: config[67387]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000004' to view the changes. 
RP/0/RP0/CPU0:Sep 13 13:19:50.799 UTC: config[67387]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.100.3.1) 
RP/0/RP0/CPU0:Sep 13 13:19:52.599 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14090]: Received disconnect from 10.100.3.1 port 50457:11: disconnected by user 
RP/0/RP0/CPU0:Sep 13 13:19:52.599 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14090]: Disconnected from user cisco 10.100.3.1 port 50457 
RP/0/RP0/CPU0:Sep 13 13:19:57.710 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 6.6.6.6:0 is UP (IPv4 connection) 
RP/0/RP0/CPU0:Sep 13 13:19:59.803 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 6.6.6.6 on GigabitEthernet0/0/0/1 in area 0 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 
RP/0/RP0/CPU0:Sep 13 13:25:12.903 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14576]: Accepted authentication/pam for cisco from 10.100.3.1 port 50528 ssh2 
RP/0/RP0/CPU0:Sep 13 13:25:22.788 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14581]: Received disconnect from 10.100.3.1 port 50528:11: disconnected by user 
RP/0/RP0/CPU0:Sep 13 13:25:22.788 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14581]: Disconnected from user cisco 10.100.3.1 port 50528 
RP/0/RP0/CPU0:Sep 13 13:25:23.714 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14747]: Accepted authentication/pam for cisco from 10.100.3.1 port 50537 ssh2