RP/0/RP0/CPU0:P4#show logging start Sep 13 13:15:11
Sun Sep 13 13:26:15.803 UTC
Time Zone UTC, DST disabled
Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns)
    Console logging: Disabled
    Monitor logging: level debugging, 0 messages logged
    Trap logging: level informational, 0 messages logged
    Buffer logging: level debugging, 220 messages logged

Log Buffer (2097152 bytes):

RP/0/RP0/CPU0:Sep 13 13:15:11.924 UTC: logger[66193]: %OS-SYSLOG-6-LOG_INFO : informational STEP7-BEGIN 
RP/0/RP0/CPU0:Sep 13 13:15:12.237 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[12899]: Received disconnect from 10.100.3.1 port 50340:11: disconnected by user 
RP/0/RP0/CPU0:Sep 13 13:15:12.237 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[12899]: Disconnected from user cisco 10.100.3.1 port 50340 
RP/0/RP0/CPU0:Sep 13 13:19:06.404 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13264]: Accepted authentication/pam for cisco from 10.100.3.1 port 50444 ssh2 
RP/0/RP0/CPU0:Sep 13 13:19:09.042 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13273]: Received disconnect from 10.100.3.1 port 50444:11: disconnected by user 
RP/0/RP0/CPU0:Sep 13 13:19:09.042 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13273]: Disconnected from user cisco 10.100.3.1 port 50444 
RP/0/RP0/CPU0:Sep 13 13:19:53.445 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13389]: Accepted authentication/pam for cisco from 10.100.3.1 port 50458 ssh2 
RP/0/RP0/CPU0:Sep 13 13:19:57.320 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/0, changed state to Down 
RP/0/RP0/CPU0:Sep 13 13:19:57.320 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/0, changed state to Down 
RP/0/RP0/CPU0:Sep 13 13:19:57.336 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/0, changed state to Up 
RP/0/RP0/CPU0:Sep 13 13:19:57.402 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/0, changed state to Up 
RP/0/RP0/CPU0:Sep 13 13:19:57.702 UTC: mpls_ldp[1178]: %ROUTING-LDP-5-NBR_CHANGE : VRF 'default' (0x60000000), Neighbor 5.5.5.5:0 is UP (IPv4 connection) 
RP/0/RP0/CPU0:Sep 13 13:19:57.752 UTC: config[66695]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000004' to view the changes. 
RP/0/RP0/CPU0:Sep 13 13:19:57.927 UTC: config[66695]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.100.3.1) 
RP/0/RP0/CPU0:Sep 13 13:19:59.752 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13398]: Received disconnect from 10.100.3.1 port 50458:11: disconnected by user 
RP/0/RP0/CPU0:Sep 13 13:19:59.752 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13398]: Disconnected from user cisco 10.100.3.1 port 50458 
RP/0/RP0/CPU0:Sep 13 13:19:59.806 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 5.5.5.5 on GigabitEthernet0/0/0/0 in area 0 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 
RP/0/RP0/CPU0:Sep 13 13:26:03.561 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13954]: Accepted authentication/pam for cisco from 10.100.3.1 port 50548 ssh2 
RP/0/RP0/CPU0:Sep 13 13:26:13.250 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13959]: Received disconnect from 10.100.3.1 port 50548:11: disconnected by user 
RP/0/RP0/CPU0:Sep 13 13:26:13.250 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[13959]: Disconnected from user cisco 10.100.3.1 port 50548 
RP/0/RP0/CPU0:Sep 13 13:26:13.944 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[14124]: Accepted authentication/pam for cisco from 10.100.3.1 port 50550 ssh2