RP/0/RP0/CPU0:R2#show logging Sat Sep 5 14:03:44.721 UTC Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns) Console logging: Disabled Monitor logging: level debugging, 0 messages logged Trap logging: level informational, 0 messages logged Buffer logging: level debugging, 57 messages logged Log Buffer (2097152 bytes): RP/0/RP0/CPU0:Sep 5 13:58:42.970 UTC: syslogd[274]: %SECURITY-XR_SSL-6-INFO : XR SSL info: Setting fips register RP/0/RP0/CPU0:Sep 5 13:58:48.502 UTC: shelfmgr[259]: %PLATFORM-SHELFMGR-6-INFO_LOG : 0/RP0 serial #: VSN-4B9SJ0W RP/0/RP0/CPU0:Sep 5 13:59:24.153 UTC: ifmgr[155]: %PKT_INFRA-IFMGR-6-NODE_STATE_CHANGE : Node 0/RP0/CPU0 state is connected. RP/0/RP0/CPU0:Sep 5 14:00:12.755 UTC: pim6[1166]: %ROUTING-PIM-5-HA_NOTICE : NSR not ready RP/0/RP0/CPU0:Sep 5 14:00:13.449 UTC: ipsec_mp[195]: %SECURITY-IMP-6-PROC_READY : Process ipsec_mp is ready RP/0/RP0/CPU0:Sep 5 14:00:13.458 UTC: pim[1165]: %ROUTING-PIM-5-HA_NOTICE : NSR not ready RP/0/RP0/CPU0:Sep 5 14:00:15.162 UTC: cepki[261]: %SECURITY-CEPKI-6-INFO : certificate database updated RP/0/RP0/CPU0:Sep 5 14:00:17.049 UTC: processmgr[51]: %OS-SYSMGR-7-DEBUG : policy_repository(1) (jid 1156) did not signal end of initialization RP/0/RP0/CPU0:Sep 5 14:00:17.274 UTC: sysmgr_log[69121]: %OS-SYSMGR-7-CHECK_LOG : /pkg/bin/sysmgr_debug_script invoked for : (policy_repository) process did not signal EOI Output is in /var/log/sysmgr_debug/debug.node0_RP0_CPU0.3579.log RP/0/RP0/CPU0:Sep 5 14:00:18.372 UTC: processmgr[51]: %OS-SYSMGR-6-INFO : EOI received for process policy_repository,with pid 2420 RP/0/RP0/CPU0:Sep 5 14:00:21.956 UTC: smartlicserver[157]: %LICENSE-SMART_LIC-6-AGENT_ENABLED : Smart Agent for Licensing is enabled RP/0/RP0/CPU0:Sep 5 14:00:30.162 UTC: script_agent_main[219]: %OS-SCRIPT_MGMT-6-PROCESS_START : ScriptAgent: Start :: Mode: Active RP/0/RP0/CPU0:Sep 5 14:00:31.851 UTC: script_watcher_main[164]: %OS-SCRIPT_MGMT-6-PROCESS_START : ScriptWatcher: Start :: Mode: Active RP/0/RP0/CPU0:Sep 5 14:00:34.150 UTC: shelfmgr[259]: %PLATFORM-SHELFMGR-6-INFO_LOG : 0/RP0/CPU0 is operational RP/0/RP0/CPU0:Sep 5 14:00:34.862 UTC: pyztp2[140]: %INFRA-ZTP-7-NOT_CONFIGURED : ZTP is not configured to run RP/0/RP0/CPU0:Sep 5 14:00:34.951 UTC: pyztp2[140]: %INFRA-ZTP-4-EXITED : ZTP exited RP/0/RP0/CPU0:Sep 5 14:00:36.249 UTC: sys_rec[1189]: %SECURITY-SYSTEM_RECOVERY-6-DISABLED : System recovery disabled RP/0/RP0/CPU0:Sep 5 14:00:36.649 UTC: xrd_freeze_monitor[205]: %PLATFORM-XRD-4-FREEZE_MONITOR_CHECK_WARNING : XRd freeze-monitor hit a delay of 149 ms. Possible freeze of host or VM RP/0/RP0/CPU0:Sep 5 14:00:36.954 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : SSH syslog proxy has started RP/0/RP0/CPU0:Sep 5 14:00:51.774 UTC: ospf[1035]: %ROUTING-OSPF-5-HA_NOTICE_START : Starting OSPF RP/0/RP0/CPU0:Sep 5 14:00:52.056 UTC: syslogd[274]: %OS-SYSLOG-6-CONFIG_COMMIT : Logging Configuration 'logging console disable' got committed RP/0/RP0/CPU0:Sep 5 14:00:54.962 UTC: locald_DLRSC[313]: %SECURITY-LOCALD-6-USER_PASSWORD_UPDATED : User 'cisco' password is configured or updated RP/0/RP0/CPU0:Sep 5 14:00:55.362 UTC: ospf[1035]: %ROUTING-OSPF-6-HA_INFO : Process 1: OSPF process initialization complete RP/0/RP0/CPU0:Sep 5 14:00:55.669 UTC: ospf[1035]: %ROUTING-OSPF-5-HA_NOTICE : Process 1: Signaled PROC_AVAILABLE RP/0/RP0/CPU0:Sep 5 14:01:00.560 UTC: ssh_conf_proxy[1185]: %SECURITY-MPP-6-MSG_INFO : Updated Management Plane configuration for service: ssh RP/0/RP0/CPU0:Sep 5 14:01:04.667 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[4370]: Server listening on 0.0.0.0 port 22. RP/0/RP0/CPU0:Sep 5 14:01:04.667 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[4370]: Server listening on :: port 22. RP/0/RP0/CPU0:Sep 5 14:01:07.171 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[4395]: Server listening on 0.0.0.0 port 22. RP/0/RP0/CPU0:Sep 5 14:01:07.171 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[4395]: Server listening on :: port 22. RP/0/RP0/CPU0:Sep 5 14:01:07.666 UTC: cepki[261]: %SECURITY-CEPKI-6-KEY_INFO : One or more host keypairs exist. Not auto-generating keypairs. RP/0/RP0/CPU0:Sep 5 14:01:08.362 UTC: smartlicserver[157]: %LICENSE-SMART_LIC-6-REPORTING_REQUIRED : A Usage report acknowledgement will be required in 89 days. RP/0/RP0/CPU0:Sep 5 14:01:08.670 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface MgmtEth0/RP0/CPU0/0, changed state to Down RP/0/RP0/CPU0:Sep 5 14:01:08.671 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface MgmtEth0/RP0/CPU0/0, changed state to Down RP/0/RP0/CPU0:Sep 5 14:01:08.676 UTC: cfgmgr-rp[243]: %MGBL-CONFIG-6-OIR_RESTORE : Configuration for node '0/0/0' has been restored. RP/0/RP0/CPU0:Sep 5 14:01:08.862 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface MgmtEth0/RP0/CPU0/0, changed state to Up RP/0/RP0/CPU0:Sep 5 14:01:08.865 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface MgmtEth0/RP0/CPU0/0, changed state to Up RP/0/RP0/CPU0:Sep 5 14:01:08.874 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/0, changed state to Down RP/0/RP0/CPU0:Sep 5 14:01:08.874 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/0, changed state to Down RP/0/RP0/CPU0:Sep 5 14:01:08.874 UTC: ifmgr[155]: %PKT_INFRA-LINK-5-CHANGED : Interface GigabitEthernet0/0/0/1, changed state to Administratively Down RP/0/RP0/CPU0:Sep 5 14:01:08.874 UTC: ifmgr[155]: %PKT_INFRA-LINK-5-CHANGED : Interface GigabitEthernet0/0/0/2, changed state to Administratively Down RP/0/RP0/CPU0:Sep 5 14:01:09.080 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/0, changed state to Up RP/0/RP0/CPU0:Sep 5 14:01:09.150 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/0, changed state to Up RP/0/RP0/CPU0:Sep 5 14:01:09.356 UTC: plat_sl_client[204]: %LICENSE-PLAT_CLIENT-6-STATE_CHANGE : Licensing platform state changing from UNKNOWN to ENABLED RP/0/RP0/CPU0:Sep 5 14:01:47.377 UTC: smartlicserver[157]: %LICENSE-SMART_LIC-3-COMM_FAILED : Communications failure with the Cisco Smart License Utility (CSLU) : Unable to resolve server hostname/domain name RP/0/RP0/CPU0:Sep 5 14:01:49.193 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 1.1.1.1 on GigabitEthernet0/0/0/0 in area 0 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 RP/0/RP0/CPU0:Sep 5 14:01:49.450 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[4435]: Accepted authentication/pam for cisco from 10.100.3.1 port 49334 ssh2 RP/0/RP0/CPU0:Sep 5 14:01:52.255 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[4440]: Received disconnect from 10.100.3.1 port 49334:11: disconnected by user RP/0/RP0/CPU0:Sep 5 14:01:52.255 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[4440]: Disconnected from user cisco 10.100.3.1 port 49334 RP/0/RP0/CPU0:Sep 5 14:01:55.679 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 3.3.3.3 on GigabitEthernet0/0/0/0 in area 0 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 RP/0/RP0/CPU0:Sep 5 14:01:57.626 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 4.4.4.4 on GigabitEthernet0/0/0/0 in area 0 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 RP/0/RP0/CPU0:Sep 5 14:02:56.595 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[4956]: Accepted authentication/pam for cisco from 10.100.3.1 port 49360 ssh2 RP/0/RP0/CPU0:Sep 5 14:02:59.397 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[4961]: Received disconnect from 10.100.3.1 port 49360:11: disconnected by user RP/0/RP0/CPU0:Sep 5 14:02:59.397 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[4961]: Disconnected from user cisco 10.100.3.1 port 49360 RP/0/RP0/CPU0:Sep 5 14:03:33.104 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[5099]: Accepted authentication/pam for cisco from 10.100.3.1 port 49388 ssh2 RP/0/RP0/CPU0:Sep 5 14:03:42.475 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[5104]: Received disconnect from 10.100.3.1 port 49388:11: disconnected by user RP/0/RP0/CPU0:Sep 5 14:03:42.475 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[5104]: Disconnected from user cisco 10.100.3.1 port 49388 RP/0/RP0/CPU0:Sep 5 14:03:43.160 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[5244]: Accepted authentication/pam for cisco from 10.100.3.1 port 49389 ssh2