RP/0/RP0/CPU0:R13#show logging Sun Sep 6 07:43:04.061 UTC Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns) Console logging: Disabled Monitor logging: level debugging, 0 messages logged Trap logging: level informational, 0 messages logged Buffer logging: level debugging, 61 messages logged Log Buffer (2097152 bytes): RP/0/RP0/CPU0:Sep 6 07:36:31.817 UTC: syslogd[274]: %SECURITY-XR_SSL-6-INFO : XR SSL info: Setting fips register RP/0/RP0/CPU0:Sep 6 07:36:37.524 UTC: shelfmgr[259]: %PLATFORM-SHELFMGR-6-INFO_LOG : 0/RP0 serial #: VSN-3H184O0 RP/0/RP0/CPU0:Sep 6 07:37:14.310 UTC: ifmgr[155]: %PKT_INFRA-IFMGR-6-NODE_STATE_CHANGE : Node 0/RP0/CPU0 state is connected. RP/0/RP0/CPU0:Sep 6 07:38:05.416 UTC: pim6[1166]: %ROUTING-PIM-5-HA_NOTICE : NSR not ready RP/0/RP0/CPU0:Sep 6 07:38:05.513 UTC: pim[1165]: %ROUTING-PIM-5-HA_NOTICE : NSR not ready RP/0/RP0/CPU0:Sep 6 07:38:05.812 UTC: ipsec_mp[195]: %SECURITY-IMP-6-PROC_READY : Process ipsec_mp is ready RP/0/RP0/CPU0:Sep 6 07:38:06.824 UTC: cepki[261]: %SECURITY-CEPKI-6-INFO : certificate database updated RP/0/RP0/CPU0:Sep 6 07:38:07.208 UTC: processmgr[51]: %OS-SYSMGR-7-DEBUG : policy_repository(1) (jid 1156) did not signal end of initialization RP/0/RP0/CPU0:Sep 6 07:38:07.512 UTC: sysmgr_log[69119]: %OS-SYSMGR-7-CHECK_LOG : /pkg/bin/sysmgr_debug_script invoked for : (policy_repository) process did not signal EOI Output is in /var/log/sysmgr_debug/debug.node0_RP0_CPU0.3573.log RP/0/RP0/CPU0:Sep 6 07:38:10.932 UTC: processmgr[51]: %OS-SYSMGR-6-INFO : EOI received for process policy_repository,with pid 2424 RP/0/RP0/CPU0:Sep 6 07:38:14.509 UTC: smartlicserver[157]: %LICENSE-SMART_LIC-6-AGENT_ENABLED : Smart Agent for Licensing is enabled RP/0/RP0/CPU0:Sep 6 07:38:23.013 UTC: script_agent_main[219]: %OS-SCRIPT_MGMT-6-PROCESS_START : ScriptAgent: Start :: Mode: Active RP/0/RP0/CPU0:Sep 6 07:38:23.805 UTC: script_watcher_main[164]: %OS-SCRIPT_MGMT-6-PROCESS_START : ScriptWatcher: Start :: Mode: Active RP/0/RP0/CPU0:Sep 6 07:38:26.905 UTC: shelfmgr[259]: %PLATFORM-SHELFMGR-6-INFO_LOG : 0/RP0/CPU0 is operational RP/0/RP0/CPU0:Sep 6 07:38:27.608 UTC: pyztp2[140]: %INFRA-ZTP-7-NOT_CONFIGURED : ZTP is not configured to run RP/0/RP0/CPU0:Sep 6 07:38:27.617 UTC: pyztp2[140]: %INFRA-ZTP-4-EXITED : ZTP exited RP/0/RP0/CPU0:Sep 6 07:38:28.805 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : SSH syslog proxy has started RP/0/RP0/CPU0:Sep 6 07:38:28.806 UTC: sys_rec[1189]: %SECURITY-SYSTEM_RECOVERY-6-DISABLED : System recovery disabled RP/0/RP0/CPU0:Sep 6 07:38:43.821 UTC: ospf[1035]: %ROUTING-OSPF-5-HA_NOTICE_START : Starting OSPF RP/0/RP0/CPU0:Sep 6 07:38:43.831 UTC: syslogd[274]: %OS-SYSLOG-6-CONFIG_COMMIT : Logging Configuration 'logging console disable' got committed RP/0/RP0/CPU0:Sep 6 07:38:46.108 UTC: locald_DLRSC[313]: %SECURITY-LOCALD-6-USER_PASSWORD_UPDATED : User 'cisco' password is configured or updated RP/0/RP0/CPU0:Sep 6 07:38:47.105 UTC: ospf[1035]: %ROUTING-OSPF-6-HA_INFO : Process 2: OSPF process initialization complete RP/0/RP0/CPU0:Sep 6 07:38:47.316 UTC: ospf[1035]: %ROUTING-OSPF-5-HA_NOTICE : Process 2: Signaled PROC_AVAILABLE RP/0/RP0/CPU0:Sep 6 07:38:51.406 UTC: ssh_conf_proxy[1185]: %SECURITY-MPP-6-MSG_INFO : Updated Management Plane configuration for service: ssh RP/0/RP0/CPU0:Sep 6 07:38:55.118 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[4371]: Server listening on 0.0.0.0 port 22. RP/0/RP0/CPU0:Sep 6 07:38:55.118 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[4371]: Server listening on :: port 22. RP/0/RP0/CPU0:Sep 6 07:38:57.107 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[4395]: Server listening on 0.0.0.0 port 22. RP/0/RP0/CPU0:Sep 6 07:38:57.107 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[4395]: Server listening on :: port 22. RP/0/RP0/CPU0:Sep 6 07:38:57.909 UTC: cepki[261]: %SECURITY-CEPKI-6-KEY_INFO : One or more host keypairs exist. Not auto-generating keypairs. RP/0/RP0/CPU0:Sep 6 07:38:58.522 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/0, changed state to Down RP/0/RP0/CPU0:Sep 6 07:38:58.522 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/0, changed state to Down RP/0/RP0/CPU0:Sep 6 07:38:58.522 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/1, changed state to Down RP/0/RP0/CPU0:Sep 6 07:38:58.522 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/1, changed state to Down RP/0/RP0/CPU0:Sep 6 07:38:58.522 UTC: ifmgr[155]: %PKT_INFRA-LINK-5-CHANGED : Interface GigabitEthernet0/0/0/2, changed state to Administratively Down RP/0/RP0/CPU0:Sep 6 07:38:58.605 UTC: smartlicserver[157]: %LICENSE-SMART_LIC-6-REPORTING_REQUIRED : A Usage report acknowledgement will be required in 89 days. RP/0/RP0/CPU0:Sep 6 07:38:58.610 UTC: cfgmgr-rp[243]: %MGBL-CONFIG-6-OIR_RESTORE : Configuration for node '0/0/0' has been restored. RP/0/RP0/CPU0:Sep 6 07:38:58.705 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/0, changed state to Up RP/0/RP0/CPU0:Sep 6 07:38:58.707 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/1, changed state to Up RP/0/RP0/CPU0:Sep 6 07:38:58.710 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/0, changed state to Up RP/0/RP0/CPU0:Sep 6 07:38:58.714 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/1, changed state to Up RP/0/RP0/CPU0:Sep 6 07:38:58.810 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface MgmtEth0/RP0/CPU0/0, changed state to Down RP/0/RP0/CPU0:Sep 6 07:38:58.810 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface MgmtEth0/RP0/CPU0/0, changed state to Down RP/0/RP0/CPU0:Sep 6 07:38:58.924 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface MgmtEth0/RP0/CPU0/0, changed state to Up RP/0/RP0/CPU0:Sep 6 07:38:59.007 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface MgmtEth0/RP0/CPU0/0, changed state to Up RP/0/RP0/CPU0:Sep 6 07:38:59.209 UTC: plat_sl_client[204]: %LICENSE-PLAT_CLIENT-6-STATE_CHANGE : Licensing platform state changing from UNKNOWN to ENABLED RP/0/RP0/CPU0:Sep 6 07:39:03.621 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[4423]: Accepted authentication/pam for cisco from 10.100.3.1 port 58469 ssh2 RP/0/RP0/CPU0:Sep 6 07:39:05.909 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[4428]: Received disconnect from 10.100.3.1 port 58469:11: disconnected by user RP/0/RP0/CPU0:Sep 6 07:39:05.909 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[4428]: Disconnected from user cisco 10.100.3.1 port 58469 RP/0/RP0/CPU0:Sep 6 07:39:37.620 UTC: smartlicserver[157]: %LICENSE-SMART_LIC-3-COMM_FAILED : Communications failure with the Cisco Smart License Utility (CSLU) : Unable to resolve server hostname/domain name RP/0/RP0/CPU0:Sep 6 07:39:38.177 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[4494]: Accepted authentication/pam for cisco from 10.100.3.1 port 58484 ssh2 RP/0/RP0/CPU0:Sep 6 07:39:38.838 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 2, Nbr 11.11.11.11 on GigabitEthernet0/0/0/0 in area 0 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 RP/0/RP0/CPU0:Sep 6 07:39:38.844 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 2, Nbr 12.12.12.12 on GigabitEthernet0/0/0/1 in area 0 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 RP/0/RP0/CPU0:Sep 6 07:39:40.147 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[4499]: Received disconnect from 10.100.3.1 port 58484:11: disconnected by user RP/0/RP0/CPU0:Sep 6 07:39:40.147 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[4499]: Disconnected from user cisco 10.100.3.1 port 58484 RP/0/RP0/CPU0:Sep 6 07:39:49.261 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[4552]: Accepted authentication/pam for cisco from 10.100.3.1 port 58491 ssh2 RP/0/RP0/CPU0:Sep 6 07:39:51.641 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[4557]: Received disconnect from 10.100.3.1 port 58491:11: disconnected by user RP/0/RP0/CPU0:Sep 6 07:39:51.641 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[4557]: Disconnected from user cisco 10.100.3.1 port 58491 RP/0/RP0/CPU0:Sep 6 07:42:48.363 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[5267]: Accepted authentication/pam for cisco from 10.100.3.1 port 58588 ssh2 RP/0/RP0/CPU0:Sep 6 07:43:01.119 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[5272]: Received disconnect from 10.100.3.1 port 58588:11: disconnected by user RP/0/RP0/CPU0:Sep 6 07:43:01.119 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[5272]: Disconnected from user cisco 10.100.3.1 port 58588 RP/0/RP0/CPU0:Sep 6 07:43:02.230 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[5470]: Accepted authentication/pam for cisco from 10.100.3.1 port 58591 ssh2