RP/0/RP0/CPU0:R12#show logging start Sep 6 11:10:16
Sun Sep  6 11:16:17.333 UTC
Time Zone UTC, DST disabled
Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns)
    Console logging: Disabled
    Monitor logging: level debugging, 0 messages logged
    Trap logging: level informational, 0 messages logged
    Buffer logging: level debugging, 101 messages logged

Log Buffer (2097152 bytes):

RP/0/RP0/CPU0:Sep  6 11:10:16.889 UTC: logger[66499]: %OS-SYSLOG-6-LOG_INFO : informational STEP1-BEGIN 
RP/0/RP0/CPU0:Sep  6 11:10:17.153 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9109]: Received disconnect from 10.100.3.1 port 65362:11: disconnected by user 
RP/0/RP0/CPU0:Sep  6 11:10:17.153 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9109]: Disconnected from user cisco 10.100.3.1 port 65362 
RP/0/RP0/CPU0:Sep  6 11:12:45.291 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 4.4.4.4 on GigabitEthernet0/0/0/0 in area 0 from INIT to DOWN, Neighbor Down: dead timer expired, vrf default vrfid 0x60000000 
RP/0/RP0/CPU0:Sep  6 11:12:55.379 UTC: exec[66718]: %SECURITY-LOGIN-6-AUTHEN_SUCCESS : Successfully authenticated user 'cisco' from 'console' on 'con0_RP0_CPU0' 
RP/0/RP0/CPU0:Sep  6 11:12:57.973 UTC: config[66748]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000001' to view the changes. 
RP/0/RP0/CPU0:Sep  6 11:12:58.261 UTC: config[66748]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco 
RP/0/RP0/CPU0:Sep  6 11:12:59.790 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 13.13.13.13 on GigabitEthernet0/0/0/1 in area 0 from FULL to DOWN, Neighbor Down: interface down or detached, vrf default vrfid 0x60000000 
RP/0/RP0/CPU0:Sep  6 11:13:00.498 UTC: config[66763]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000002' to view the changes. 
RP/0/RP0/CPU0:Sep  6 11:13:00.666 UTC: config[66763]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco 
RP/0/RP0/CPU0:Sep  6 11:13:04.070 UTC: ospf[1035]: %ROUTING-OSPF-4-ERRRCV : Received invalid packet: mismatch area ID, from backbone area must be virtual-link but not found from 10.1.12.13, GigabitEthernet0/0/0/1 
RP/0/RP0/CPU0:Sep  6 11:13:05.239 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 4.4.4.4 on GigabitEthernet0/0/0/0 in area 2 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 
RP/0/RP0/CPU0:Sep  6 11:13:19.186 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 13.13.13.13 on GigabitEthernet0/0/0/1 in area 2 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 
RP/0/RP0/CPU0:Sep  6 11:16:01.077 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9689]: Accepted authentication/pam for cisco from 10.100.3.1 port 65505 ssh2 
RP/0/RP0/CPU0:Sep  6 11:16:14.786 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9694]: Received disconnect from 10.100.3.1 port 65505:11: disconnected by user 
RP/0/RP0/CPU0:Sep  6 11:16:14.786 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9694]: Disconnected from user cisco 10.100.3.1 port 65505 
RP/0/RP0/CPU0:Sep  6 11:16:15.707 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9900]: Accepted authentication/pam for cisco from 10.100.3.1 port 65509 ssh2