RP/0/RP0/CPU0:R1#clear ospf 1 process
Sat Sep  5 15:58:34.220 UTC
Reset OSPF process 1? [no]: yes
RP/0/RP0/CPU0:R1#show ospf interface GigabitEthernet0/0/0/0
Sat Sep  5 15:58:34.500 UTC

GigabitEthernet0/0/0/0 is up, line protocol is up 
  Internet Address 10.1.2.1/24, Area 0, SID 0, Strict-SPF SID 0
  Label stack Primary label 0 Backup label 0 SRTE label 0
  Process ID 1, Router ID 1.1.1.1, Network Type BROADCAST, Cost: 1
  Transmit Delay is 1 sec, State WAITING, Priority 1, MTU 1500, MaxPktSz 1500
  Forward reference No, Unnumbered no,  Bandwidth 1000000 
  RIB LC sync Yes
  No designated router on this network
  No backup designated router on this network
  Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
    Hello due in 00:00:08:592
    Wait time before Designated router selection 00:00:39
  Index 1/1, flood queue length 0
  Next 0(0)/0(0)
  Last flood scan length is 1, maximum is 1
  Last flood scan time is 0 msec, maximum is 0 msec
  LS Ack List: current length 0, high water mark 4
  Neighbor Count is 0, Adjacent neighbor count is 0
  Suppress hello for 0 neighbor(s)
  Multi-area interface Count is 0
  Segment Routing Forwarding MPLS enabled: Yes
  Adjacency hold timer expired last : Never
  Exchange timer expired last : Never
RP/0/RP0/CPU0:R1#show ospf neighbor
Sat Sep  5 15:58:35.291 UTC