RP/0/RP0/CPU0:R1#show logging start Sep 8 10:22:18
Tue Sep  8 10:25:50.710 UTC
Time Zone UTC, DST disabled
Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns)
    Console logging: Disabled
    Monitor logging: level debugging, 0 messages logged
    Trap logging: level informational, 0 messages logged
    Buffer logging: level debugging, 145 messages logged

Log Buffer (2097152 bytes):

RP/0/RP0/CPU0:Sep  8 10:22:18.943 UTC: logger[69190]: %OS-SYSLOG-6-LOG_INFO : informational STEP4-BEGIN 
RP/0/RP0/CPU0:Sep  8 10:22:19.218 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7704]: Received disconnect from 10.100.3.1 port 51512:11: disconnected by user 
RP/0/RP0/CPU0:Sep  8 10:22:19.218 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[7704]: Disconnected from user cisco 10.100.3.1 port 51512 
RP/0/RP0/CPU0:Sep  8 10:23:43.108 UTC: config[69304]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000003' to view the changes. 
RP/0/RP0/CPU0:Sep  8 10:23:43.337 UTC: config[69304]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco 
RP/0/RP0/CPU0:Sep  8 10:23:45.016 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/0, changed state to Down 
RP/0/RP0/CPU0:Sep  8 10:23:45.016 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/0, changed state to Down 
RP/0/RP0/CPU0:Sep  8 10:23:45.032 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/0, changed state to Up 
RP/0/RP0/CPU0:Sep  8 10:23:45.034 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/0, changed state to Up 
RP/0/RP0/CPU0:Sep  8 10:23:45.329 UTC: config[69319]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000004' to view the changes. 
RP/0/RP0/CPU0:Sep  8 10:23:45.456 UTC: config[69319]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco 
RP/0/RP0/CPU0:Sep  8 10:23:49.945 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 4.4.4.4 on GigabitEthernet0/0/0/0 in area 0 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 
RP/0/RP0/CPU0:Sep  8 10:23:53.224 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 2.2.2.2 on GigabitEthernet0/0/0/0 in area 0 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 
RP/0/RP0/CPU0:Sep  8 10:25:35.608 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[8044]: Accepted authentication/pam for cisco from 10.100.3.1 port 51611 ssh2 
RP/0/RP0/CPU0:Sep  8 10:25:48.148 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[8053]: Received disconnect from 10.100.3.1 port 51611:11: disconnected by user 
RP/0/RP0/CPU0:Sep  8 10:25:48.148 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[8053]: Disconnected from user cisco 10.100.3.1 port 51611 
RP/0/RP0/CPU0:Sep  8 10:25:48.930 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[8232]: Accepted authentication/pam for cisco from 10.100.3.1 port 51616 ssh2