RP/0/RP0/CPU0:R3#show logging start Sep 8 10:30:39
Tue Sep  8 10:34:40.125 UTC
Time Zone UTC, DST disabled
Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns)
    Console logging: Disabled
    Monitor logging: level debugging, 0 messages logged
    Trap logging: level informational, 0 messages logged
    Buffer logging: level debugging, 179 messages logged

Log Buffer (2097152 bytes):

RP/0/RP0/CPU0:Sep  8 10:30:39.636 UTC: logger[66332]: %OS-SYSLOG-6-LOG_INFO : informational STEP6-BEGIN 
RP/0/RP0/CPU0:Sep  8 10:30:39.870 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[8942]: Received disconnect from 10.100.3.1 port 51784:11: disconnected by user 
RP/0/RP0/CPU0:Sep  8 10:30:39.870 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[8942]: Disconnected from user cisco 10.100.3.1 port 51784 
RP/0/RP0/CPU0:Sep  8 10:31:36.724 UTC: config[66410]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000007' to view the changes. 
RP/0/RP0/CPU0:Sep  8 10:31:37.020 UTC: config[66410]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco 
RP/0/RP0/CPU0:Sep  8 10:31:38.529 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/0, changed state to Down 
RP/0/RP0/CPU0:Sep  8 10:31:38.529 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/0, changed state to Down 
RP/0/RP0/CPU0:Sep  8 10:31:38.546 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/0, changed state to Up 
RP/0/RP0/CPU0:Sep  8 10:31:38.548 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/0, changed state to Up 
RP/0/RP0/CPU0:Sep  8 10:31:38.839 UTC: config[66429]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000008' to view the changes. 
RP/0/RP0/CPU0:Sep  8 10:31:38.945 UTC: config[66429]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco 
RP/0/RP0/CPU0:Sep  8 10:31:44.296 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 1.1.1.1 on GigabitEthernet0/0/0/0 in area 0 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 
RP/0/RP0/CPU0:Sep  8 10:31:44.296 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 2.2.2.2 on GigabitEthernet0/0/0/0 in area 0 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 
RP/0/RP0/CPU0:Sep  8 10:34:25.273 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9314]: Accepted authentication/pam for cisco from 10.100.3.1 port 51911 ssh2 
RP/0/RP0/CPU0:Sep  8 10:34:37.437 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9319]: Received disconnect from 10.100.3.1 port 51911:11: disconnected by user 
RP/0/RP0/CPU0:Sep  8 10:34:37.438 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9319]: Disconnected from user cisco 10.100.3.1 port 51911 
RP/0/RP0/CPU0:Sep  8 10:34:38.215 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9498]: Accepted authentication/pam for cisco from 10.100.3.1 port 51914 ssh2