RP/0/RP0/CPU0:R4#show logging start Sep 8 10:31:02
Tue Sep  8 10:35:02.675 UTC
Time Zone UTC, DST disabled
Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns)
    Console logging: Disabled
    Monitor logging: level debugging, 0 messages logged
    Trap logging: level informational, 0 messages logged
    Buffer logging: level debugging, 162 messages logged

Log Buffer (2097152 bytes):

RP/0/RP0/CPU0:Sep  8 10:31:02.418 UTC: logger[66439]: %OS-SYSLOG-6-LOG_INFO : informational STEP6-BEGIN 
RP/0/RP0/CPU0:Sep  8 10:31:02.725 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9049]: Received disconnect from 10.100.3.1 port 51797:11: disconnected by user 
RP/0/RP0/CPU0:Sep  8 10:31:02.725 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9049]: Disconnected from user cisco 10.100.3.1 port 51797 
RP/0/RP0/CPU0:Sep  8 10:31:50.924 UTC: config[66512]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000003' to view the changes. 
RP/0/RP0/CPU0:Sep  8 10:31:51.143 UTC: config[66512]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco 
RP/0/RP0/CPU0:Sep  8 10:31:52.659 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/0, changed state to Down 
RP/0/RP0/CPU0:Sep  8 10:31:52.660 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/0, changed state to Down 
RP/0/RP0/CPU0:Sep  8 10:31:52.716 UTC: ifmgr[155]: %PKT_INFRA-LINK-3-UPDOWN : Interface GigabitEthernet0/0/0/0, changed state to Up 
RP/0/RP0/CPU0:Sep  8 10:31:52.718 UTC: ifmgr[155]: %PKT_INFRA-LINEPROTO-5-UPDOWN : Line protocol on Interface GigabitEthernet0/0/0/0, changed state to Up 
RP/0/RP0/CPU0:Sep  8 10:31:52.969 UTC: config[66527]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000004' to view the changes. 
RP/0/RP0/CPU0:Sep  8 10:31:53.066 UTC: config[66527]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco 
RP/0/RP0/CPU0:Sep  8 10:31:53.884 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 1.1.1.1 on GigabitEthernet0/0/0/0 in area 0 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 
RP/0/RP0/CPU0:Sep  8 10:31:53.884 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 2.2.2.2 on GigabitEthernet0/0/0/0 in area 0 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 
RP/0/RP0/CPU0:Sep  8 10:34:47.660 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9417]: Accepted authentication/pam for cisco from 10.100.3.1 port 51920 ssh2 
RP/0/RP0/CPU0:Sep  8 10:35:00.118 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9422]: Received disconnect from 10.100.3.1 port 51920:11: disconnected by user 
RP/0/RP0/CPU0:Sep  8 10:35:00.118 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9422]: Disconnected from user cisco 10.100.3.1 port 51920 
RP/0/RP0/CPU0:Sep  8 10:35:01.027 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[9605]: Accepted authentication/pam for cisco from 10.100.3.1 port 51924 ssh2