RP/0/RP0/CPU0:R2#show ospf neighbor Sat Sep 5 06:10:38.475 UTC * Indicates MADJ interface # Indicates Neighbor awaiting BFD session up Neighbors for OSPF 1 Neighbor ID Pri State Dead Time Address Interface 1.1.1.1 1 FULL/BDR 00:00:31 10.1.2.1 GigabitEthernet0/0/0/0 Neighbor is up for 00:01:57 3.3.3.3 1 FULL/DR 00:00:31 10.2.3.3 GigabitEthernet0/0/0/1 Neighbor is up for 00:08:41 Total neighbor count: 2 RP/0/RP0/CPU0:R2#show ospf interface GigabitEthernet0/0/0/0 Sat Sep 5 06:11:22.556 UTC GigabitEthernet0/0/0/0 is up, line protocol is up Internet Address 10.1.2.2/24, Area 0, SID 0, Strict-SPF SID 0 Label stack Primary label 0 Backup label 0 SRTE label 0 Process ID 1, Router ID 2.2.2.2, Network Type BROADCAST, Cost: 1 Transmit Delay is 1 sec, State DR, Priority 1, MTU 1500, MaxPktSz 1500 Forward reference No, Unnumbered no, Bandwidth 1000000 RIB LC sync Yes Designated Router (ID) 2.2.2.2, Interface address 10.1.2.2 Backup Designated router (ID) 1.1.1.1, Interface address 10.1.2.1 Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5 Hello due in 00:00:01:026 Index 1/1, flood queue length 0 Next 0(0)/0(0) Last flood scan length is 1, maximum is 2 Last flood scan time is 0 msec, maximum is 0 msec LS Ack List: current length 0, high water mark 1 Neighbor Count is 1, Adjacent neighbor count is 1 Adjacent with neighbor 1.1.1.1 (Backup Designated Router) Suppress hello for 0 neighbor(s) Message digest authentication enabled Youngest key id is 1 Multi-area interface Count is 0 Segment Routing Forwarding MPLS enabled: Yes Adjacency hold timer expired last : Never Exchange timer expired last : Never RP/0/RP0/CPU0:R2#show ospf statistics interface GigabitEthernet0/0/0/0 Sat Sep 5 06:11:23.122 UTC Interface GigabitEthernet0/0/0/0 Process ID 1 Area 0 OSPF packet and LSA statistics RX(hello) RX(router) TX LSA RX LSA TX Hello 61 - 62 - - DB Des 9 9 6 3 7 LS Req 3 3 3 7 0 LS Upd 8 8 13 8 18 LS Ack 5 5 5 14 5 TOTAL 86 25 89 32 30 OSPF Header Errors Version 0 LLS 0 Type 0 Auth RX 2 Length 0 Auth TX 0 Checksum 0 OSPF LSA Errors Type 0 Checksum 0 Length 0 Data 0 OSPF Errors Bad Source 0 Area Mismatch 0 No Virtual Link 0 Self Originated 0 No Sham Link 0 Duplicate ID 0 Nbr ignored 0 Graceful Shutdown 0 Unknown nbr 0 Passive intf 0 No DR/BDR 0 Disabled intf 0 Enqueue hello 0 Enqueue router 0 Unspecified RX 0 Unspecified TX 0 Socket 0 RP/0/RP0/CPU0:R2#