RP/0/RP0/CPU0:R3#show logging start Sep 12 00:38:59
Sat Sep 12 00:42:19.807 UTC
Time Zone UTC, DST disabled
Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns)
    Console logging: Disabled
    Monitor logging: level debugging, 0 messages logged
    Trap logging: level informational, 0 messages logged
    Buffer logging: level debugging, 178 messages logged

Log Buffer (2097152 bytes):

RP/0/RP0/CPU0:Sep 12 00:38:59.699 UTC: logger[69194]: %OS-SYSLOG-6-LOG_INFO : informational STEP7-BEGIN 
RP/0/RP0/CPU0:Sep 12 00:38:59.994 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[11802]: Received disconnect from 10.100.3.1 port 52402:11: disconnected by user 
RP/0/RP0/CPU0:Sep 12 00:38:59.994 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[11802]: Disconnected from user cisco 10.100.3.1 port 52402 
RP/0/RP0/CPU0:Sep 12 00:39:56.280 UTC: ospf[1035]: %ROUTING-OSPF-4-ERRRCV : Received invalid packet: mismatch area ID, from backbone area must be virtual-link but not found from 10.2.3.2, GigabitEthernet0/0/0/0 
RP/0/RP0/CPU0:Sep 12 00:39:58.821 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[11920]: Accepted authentication/pam for cisco from 10.100.3.1 port 52431 ssh2 
RP/0/RP0/CPU0:Sep 12 00:40:02.270 UTC: config[69338]: %MGBL-CONFIG-6-DB_COMMIT : Configuration committed by user 'cisco'. Use 'show configuration commit changes 1000000008' to view the changes. 
RP/0/RP0/CPU0:Sep 12 00:40:03.441 UTC: config[69338]: %MGBL-SYS-5-CONFIG_I : Configured from console by cisco on vty0 (10.100.3.1) 
RP/0/RP0/CPU0:Sep 12 00:40:03.809 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[11925]: Received disconnect from 10.100.3.1 port 52431:11: disconnected by user 
RP/0/RP0/CPU0:Sep 12 00:40:03.809 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[11925]: Disconnected from user cisco 10.100.3.1 port 52431 
RP/0/RP0/CPU0:Sep 12 00:40:05.486 UTC: ospf[1035]: %ROUTING-OSPF-5-ADJCHG : Process 1, Nbr 2.2.2.2 on OSPF_VL1 in area 0 from LOADING to FULL, Loading Done, vrf default vrfid 0x60000000 
RP/0/RP0/CPU0:Sep 12 00:42:05.129 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[12159]: Accepted authentication/pam for cisco from 10.100.3.1 port 52457 ssh2 
RP/0/RP0/CPU0:Sep 12 00:42:17.550 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[12164]: Received disconnect from 10.100.3.1 port 52457:11: disconnected by user 
RP/0/RP0/CPU0:Sep 12 00:42:17.550 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[12164]: Disconnected from user cisco 10.100.3.1 port 52457 
RP/0/RP0/CPU0:Sep 12 00:42:18.221 UTC: ssh_syslog_proxy[1188]: %SECURITY-SSHD_SYSLOG_PRX-6-INFO_GENERAL : sshd[12383]: Accepted authentication/pam for cisco from 10.100.3.1 port 52458 ssh2