*Sep 10 08:44:07.232: %KAZULOG-6-STEPMARK: Message from tty434(user id: cisco): STEP0-BEGIN-20260910-174405
*Sep 10 08:44:07.403: %SYS-6-LOGOUT: User cisco has exited tty session 434(10.100.3.1)
*Sep 10 08:44:07.418: %SSH-5-SSH2_CLOSE: SSH2 Session from 10.100.3.1 (tty = 0) for user 'cisco' using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' closed
*Sep 10 08:44:19.781: %SSH-5-SSH2_SESSION: SSH2 Session request from 10.100.3.1 (tty = 0) using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' Succeeded
*Sep 10 08:44:20.115: %SEC_LOGIN-5-LOGIN_SUCCESS: Login Success [user: cisco] [Source: 10.100.3.1] [localport: 22] at 08:44:20 UTC Thu Sep 10 2026
*Sep 10 08:44:20.115: %SSH-5-SSH2_USERAUTH: User 'cisco' authentication for SSH2 Session from 10.100.3.1 (tty = 0) using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' Succeeded
*Sep 10 08:44:20.740: %OSPF-6-DFT_OPT: Protocol timers for fast convergence are Enabled.
*Sep 10 08:44:21.495: %SYS-5-CONFIG_I: Configured from console by cisco on vty0 (10.100.3.1)
*Sep 10 08:44:24.278: %SYS-6-LOGOUT: User cisco has exited tty session 434(10.100.3.1)
*Sep 10 08:44:24.287: %SSH-5-SSH2_CLOSE: SSH2 Session from 10.100.3.1 (tty = 0) for user 'cisco' using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' closed
*Sep 10 08:45:17.824: %OSPF-5-ADJCHG: Process 1, Nbr 2.2.2.2 on GigabitEthernet1 from LOADING to FULL, Loading Done
*Sep 10 08:45:21.674: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on GigabitEthernet1 from LOADING to FULL, Loading Done
*Sep 10 08:45:25.438: %OSPF-5-ADJCHG: Process 1, Nbr 4.4.4.4 on GigabitEthernet1 from LOADING to FULL, Loading Done
*Sep 10 08:45:53.134: %SSH-5-SSH2_SESSION: SSH2 Session request from 10.100.3.1 (tty = 0) using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' Succeeded
*Sep 10 08:45:53.371: %SEC_LOGIN-5-LOGIN_SUCCESS: Login Success [user: cisco] [Source: 10.100.3.1] [localport: 22] at 08:45:53 UTC Thu Sep 10 2026
*Sep 10 08:45:53.371: %SSH-5-SSH2_USERAUTH: User 'cisco' authentication for SSH2 Session from 10.100.3.1 (tty = 0) using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' Succeeded
*Sep 10 08:45:53.644: %SYS-6-LOGOUT: User cisco has exited tty session 434(10.100.3.1)
*Sep 10 08:45:53.644: %SSH-5-SSH2_CLOSE: SSH2 Session from 10.100.3.1 (tty = 0) for user 'cisco' using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' closed
*Sep 10 08:46:17.627: %SSH-5-SSH2_SESSION: SSH2 Session request from 10.100.3.1 (tty = 0) using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' Succeeded
*Sep 10 08:46:17.932: %SEC_LOGIN-5-LOGIN_SUCCESS: Login Success [user: cisco] [Source: 10.100.3.1] [localport: 22] at 08:46:17 UTC Thu Sep 10 2026
*Sep 10 08:46:17.936: %SSH-5-SSH2_USERAUTH: User 'cisco' authentication for SSH2 Session from 10.100.3.1 (tty = 0) using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' Succeeded
*Sep 10 08:46:19.862: %SYS-6-LOGOUT: User cisco has exited tty session 434(10.100.3.1)
*Sep 10 08:46:19.862: %SSH-5-SSH2_CLOSE: SSH2 Session from 10.100.3.1 (tty = 0) for user 'cisco' using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' closed
*Sep 10 08:46:20.362: %SSH-5-SSH2_SESSION: SSH2 Session request from 10.100.3.1 (tty = 0) using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' Succeeded
*Sep 10 08:46:20.679: %SEC_LOGIN-5-LOGIN_SUCCESS: Login Success [user: cisco] [Source: 10.100.3.1] [localport: 22] at 08:46:20 UTC Thu Sep 10 2026