*Sep 10 08:44:08.443: %KAZULOG-6-STEPMARK: Message from tty434(user id: cisco): STEP0-BEGIN-20260910-174405
*Sep 10 08:44:08.480: %SYS-6-LOGOUT: User cisco has exited tty session 434(10.100.3.1)
*Sep 10 08:44:08.480: %SSH-5-SSH2_CLOSE: SSH2 Session from 10.100.3.1 (tty = 0) for user 'cisco' using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' closed
*Sep 10 08:44:36.418: %SSH-5-SSH2_SESSION: SSH2 Session request from 10.100.3.1 (tty = 0) using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' Succeeded
*Sep 10 08:44:36.677: %SEC_LOGIN-5-LOGIN_SUCCESS: Login Success [user: cisco] [Source: 10.100.3.1] [localport: 22] at 08:44:36 UTC Thu Sep 10 2026
*Sep 10 08:44:36.679: %SSH-5-SSH2_USERAUTH: User 'cisco' authentication for SSH2 Session from 10.100.3.1 (tty = 0) using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' Succeeded
*Sep 10 08:44:37.218: %OSPF-6-DFT_OPT: Protocol timers for fast convergence are Enabled.
*Sep 10 08:44:37.984: %SYS-5-CONFIG_I: Configured from console by cisco on vty0 (10.100.3.1)
*Sep 10 08:44:39.624: %SYS-6-LOGOUT: User cisco has exited tty session 434(10.100.3.1)
*Sep 10 08:44:39.628: %SSH-5-SSH2_CLOSE: SSH2 Session from 10.100.3.1 (tty = 0) for user 'cisco' using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' closed
*Sep 10 08:45:17.840: %OSPF-5-ADJCHG: Process 1, Nbr 1.1.1.1 on GigabitEthernet1 from LOADING to FULL, Loading Done
*Sep 10 08:45:21.668: %OSPF-5-ADJCHG: Process 1, Nbr 3.3.3.3 on GigabitEthernet1 from LOADING to FULL, Loading Done
*Sep 10 08:45:25.452: %OSPF-5-ADJCHG: Process 1, Nbr 4.4.4.4 on GigabitEthernet1 from LOADING to FULL, Loading Done
*Sep 10 08:46:24.999: %SSH-5-SSH2_SESSION: SSH2 Session request from 10.100.3.1 (tty = 0) using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' Succeeded
*Sep 10 08:46:25.251: %SEC_LOGIN-5-LOGIN_SUCCESS: Login Success [user: cisco] [Source: 10.100.3.1] [localport: 22] at 08:46:25 UTC Thu Sep 10 2026
*Sep 10 08:46:25.253: %SSH-5-SSH2_USERAUTH: User 'cisco' authentication for SSH2 Session from 10.100.3.1 (tty = 0) using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' Succeeded
*Sep 10 08:46:26.750: %SYS-6-LOGOUT: User cisco has exited tty session 434(10.100.3.1)
*Sep 10 08:46:26.750: %SSH-5-SSH2_CLOSE: SSH2 Session from 10.100.3.1 (tty = 0) for user 'cisco' using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' closed
*Sep 10 08:46:27.246: %SSH-5-SSH2_SESSION: SSH2 Session request from 10.100.3.1 (tty = 0) using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' Succeeded
*Sep 10 08:46:27.484: %SEC_LOGIN-5-LOGIN_SUCCESS: Login Success [user: cisco] [Source: 10.100.3.1] [localport: 22] at 08:46:27 UTC Thu Sep 10 2026