*Sep 10 08:44:09.784: %KAZULOG-6-STEPMARK: Message from tty434(user id: cisco): STEP0-BEGIN-20260910-174405
*Sep 10 08:44:09.831: %SYS-6-LOGOUT: User cisco has exited tty session 434(10.100.3.1)
*Sep 10 08:44:09.834: %SSH-5-SSH2_CLOSE: SSH2 Session from 10.100.3.1 (tty = 0) for user 'cisco' using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' closed
*Sep 10 08:44:40.044: %SSH-5-SSH2_SESSION: SSH2 Session request from 10.100.3.1 (tty = 0) using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' Succeeded
*Sep 10 08:44:40.425: %SEC_LOGIN-5-LOGIN_SUCCESS: Login Success [user: cisco] [Source: 10.100.3.1] [localport: 22] at 08:44:40 UTC Thu Sep 10 2026
*Sep 10 08:44:40.426: %SSH-5-SSH2_USERAUTH: User 'cisco' authentication for SSH2 Session from 10.100.3.1 (tty = 0) using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' Succeeded
*Sep 10 08:44:41.004: %OSPF-6-DFT_OPT: Protocol timers for fast convergence are Enabled.
*Sep 10 08:44:41.879: %SYS-5-CONFIG_I: Configured from console by cisco on vty0 (10.100.3.1)
*Sep 10 08:44:43.934: %SYS-6-LOGOUT: User cisco has exited tty session 434(10.100.3.1)
*Sep 10 08:44:43.940: %SSH-5-SSH2_CLOSE: SSH2 Session from 10.100.3.1 (tty = 0) for user 'cisco' using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' closed
*Sep 10 08:45:21.660: %OSPF-5-ADJCHG: Process 1, Nbr 2.2.2.2 on GigabitEthernet1 from LOADING to FULL, Loading Done
*Sep 10 08:45:21.666: %OSPF-5-ADJCHG: Process 1, Nbr 1.1.1.1 on GigabitEthernet1 from LOADING to FULL, Loading Done
*Sep 10 08:46:08.493: %SSH-5-SSH2_SESSION: SSH2 Session request from 10.100.3.1 (tty = 0) using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' Succeeded
*Sep 10 08:46:08.743: %SEC_LOGIN-5-LOGIN_SUCCESS: Login Success [user: cisco] [Source: 10.100.3.1] [localport: 22] at 08:46:08 UTC Thu Sep 10 2026
*Sep 10 08:46:08.745: %SSH-5-SSH2_USERAUTH: User 'cisco' authentication for SSH2 Session from 10.100.3.1 (tty = 0) using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' Succeeded
*Sep 10 08:46:09.044: %SYS-6-LOGOUT: User cisco has exited tty session 434(10.100.3.1)
*Sep 10 08:46:09.044: %SSH-5-SSH2_CLOSE: SSH2 Session from 10.100.3.1 (tty = 0) for user 'cisco' using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' closed
*Sep 10 08:46:31.624: %SSH-5-SSH2_SESSION: SSH2 Session request from 10.100.3.1 (tty = 0) using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' Succeeded
*Sep 10 08:46:31.872: %SEC_LOGIN-5-LOGIN_SUCCESS: Login Success [user: cisco] [Source: 10.100.3.1] [localport: 22] at 08:46:31 UTC Thu Sep 10 2026
*Sep 10 08:46:31.875: %SSH-5-SSH2_USERAUTH: User 'cisco' authentication for SSH2 Session from 10.100.3.1 (tty = 0) using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' Succeeded
*Sep 10 08:46:33.433: %SYS-6-LOGOUT: User cisco has exited tty session 434(10.100.3.1)
*Sep 10 08:46:33.434: %SSH-5-SSH2_CLOSE: SSH2 Session from 10.100.3.1 (tty = 0) for user 'cisco' using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' closed
*Sep 10 08:46:33.877: %SSH-5-SSH2_SESSION: SSH2 Session request from 10.100.3.1 (tty = 0) using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' Succeeded
*Sep 10 08:46:34.114: %SEC_LOGIN-5-LOGIN_SUCCESS: Login Success [user: cisco] [Source: 10.100.3.1] [localport: 22] at 08:46:34 UTC Thu Sep 10 2026