*Sep 10 08:44:10.859: %KAZULOG-6-STEPMARK: Message from tty434(user id: cisco): STEP0-BEGIN-20260910-174405
*Sep 10 08:44:10.901: %SYS-6-LOGOUT: User cisco has exited tty session 434(10.100.3.1)
*Sep 10 08:44:10.902: %SSH-5-SSH2_CLOSE: SSH2 Session from 10.100.3.1 (tty = 0) for user 'cisco' using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' closed
*Sep 10 08:44:44.438: %SSH-5-SSH2_SESSION: SSH2 Session request from 10.100.3.1 (tty = 0) using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' Succeeded
*Sep 10 08:44:44.674: %SEC_LOGIN-5-LOGIN_SUCCESS: Login Success [user: cisco] [Source: 10.100.3.1] [localport: 22] at 08:44:44 UTC Thu Sep 10 2026
*Sep 10 08:44:44.674: %SSH-5-SSH2_USERAUTH: User 'cisco' authentication for SSH2 Session from 10.100.3.1 (tty = 0) using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' Succeeded
*Sep 10 08:44:44.873: %OSPF-6-DFT_OPT: Protocol timers for fast convergence are Enabled.
*Sep 10 08:44:45.690: %SYS-5-CONFIG_I: Configured from console by cisco on vty0 (10.100.3.1)
*Sep 10 08:44:46.872: %SYS-6-LOGOUT: User cisco has exited tty session 434(10.100.3.1)
*Sep 10 08:44:46.872: %SSH-5-SSH2_CLOSE: SSH2 Session from 10.100.3.1 (tty = 0) for user 'cisco' using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' closed
*Sep 10 08:45:25.452: %OSPF-5-ADJCHG: Process 1, Nbr 1.1.1.1 on GigabitEthernet1 from LOADING to FULL, Loading Done
*Sep 10 08:45:25.453: %OSPF-5-ADJCHG: Process 1, Nbr 2.2.2.2 on GigabitEthernet1 from LOADING to FULL, Loading Done
*Sep 10 08:45:59.232: %SSH-5-SSH2_SESSION: SSH2 Session request from 10.100.3.1 (tty = 0) using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' Succeeded
*Sep 10 08:45:59.460: %SEC_LOGIN-5-LOGIN_SUCCESS: Login Success [user: cisco] [Source: 10.100.3.1] [localport: 22] at 08:45:59 UTC Thu Sep 10 2026
*Sep 10 08:45:59.461: %SSH-5-SSH2_USERAUTH: User 'cisco' authentication for SSH2 Session from 10.100.3.1 (tty = 0) using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' Succeeded
*Sep 10 08:46:00.222: %SYS-6-LOGOUT: User cisco has exited tty session 434(10.100.3.1)
*Sep 10 08:46:00.222: %SSH-5-SSH2_CLOSE: SSH2 Session from 10.100.3.1 (tty = 0) for user 'cisco' using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' closed
*Sep 10 08:46:37.886: %SSH-5-SSH2_SESSION: SSH2 Session request from 10.100.3.1 (tty = 0) using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' Succeeded
*Sep 10 08:46:38.148: %SEC_LOGIN-5-LOGIN_SUCCESS: Login Success [user: cisco] [Source: 10.100.3.1] [localport: 22] at 08:46:38 UTC Thu Sep 10 2026
*Sep 10 08:46:38.151: %SSH-5-SSH2_USERAUTH: User 'cisco' authentication for SSH2 Session from 10.100.3.1 (tty = 0) using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' Succeeded
*Sep 10 08:46:39.843: %SYS-6-LOGOUT: User cisco has exited tty session 434(10.100.3.1)
*Sep 10 08:46:39.844: %SSH-5-SSH2_CLOSE: SSH2 Session from 10.100.3.1 (tty = 0) for user 'cisco' using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' closed
*Sep 10 08:46:40.295: %SSH-5-SSH2_SESSION: SSH2 Session request from 10.100.3.1 (tty = 0) using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' Succeeded
*Sep 10 08:46:40.653: %SEC_LOGIN-5-LOGIN_SUCCESS: Login Success [user: cisco] [Source: 10.100.3.1] [localport: 22] at 08:46:40 UTC Thu Sep 10 2026