*Sep 10 06:32:38.625: %KAZULOG-6-STEPMARK: Message from tty434(user id: cisco): STEP0-BEGIN-20260910-153236
*Sep 10 06:32:38.661: %SSH-5-SSH2_CLOSE: SSH2 Session from 10.100.3.1 (tty = 0) for user 'cisco' using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' closed
*Sep 10 06:32:53.694: %SSH-5-SSH2_SESSION: SSH2 Session request from 10.100.3.1 (tty = 0) using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' Succeeded
*Sep 10 06:32:54.016: %SEC_LOGIN-5-LOGIN_SUCCESS: Login Success [user: cisco] [Source: 10.100.3.1] [localport: 22] at 06:32:54 UTC Thu Sep 10 2026
*Sep 10 06:32:54.018: %SSH-5-SSH2_USERAUTH: User 'cisco' authentication for SSH2 Session from 10.100.3.1 (tty = 0) using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' Succeeded
*Sep 10 06:32:54.361: %OSPF-6-DFT_OPT: Protocol timers for fast convergence are Enabled.
*Sep 10 06:32:55.507: %SYS-5-CONFIG_I: Configured from console by cisco on vty0 (10.100.3.1)
*Sep 10 06:32:56.807: %SYS-6-LOGOUT: User cisco has exited tty session 434(10.100.3.1)
*Sep 10 06:32:56.807: %SSH-5-SSH2_CLOSE: SSH2 Session from 10.100.3.1 (tty = 0) for user 'cisco' using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' closed
*Sep 10 06:33:48.280: %OSPF-5-ADJCHG: Process 1, Nbr 2.2.2.2 on GigabitEthernet1 from LOADING to FULL, Loading Done
*Sep 10 06:34:16.003: %SSH-5-SSH2_SESSION: SSH2 Session request from 10.100.3.1 (tty = 0) using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' Succeeded
*Sep 10 06:34:16.288: %SEC_LOGIN-5-LOGIN_SUCCESS: Login Success [user: cisco] [Source: 10.100.3.1] [localport: 22] at 06:34:16 UTC Thu Sep 10 2026
*Sep 10 06:34:16.288: %SSH-5-SSH2_USERAUTH: User 'cisco' authentication for SSH2 Session from 10.100.3.1 (tty = 0) using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' Succeeded
*Sep 10 06:34:18.107: %SYS-6-LOGOUT: User cisco has exited tty session 434(10.100.3.1)
*Sep 10 06:34:18.107: %SSH-5-SSH2_CLOSE: SSH2 Session from 10.100.3.1 (tty = 0) for user 'cisco' using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' closed
*Sep 10 06:34:18.642: %SSH-5-SSH2_SESSION: SSH2 Session request from 10.100.3.1 (tty = 0) using crypto cipher 'aes128-gcm@openssh.com', hmac 'hmac-sha2-256-etm@openssh.com' Succeeded
*Sep 10 06:34:18.917: %SEC_LOGIN-5-LOGIN_SUCCESS: Login Success [user: cisco] [Source: 10.100.3.1] [localport: 22] at 06:34:18 UTC Thu Sep 10 2026